Health New Zealand Te Whatu Ora Shared Care FHIR API
0.4.5 - release New Zealand flag

Health New Zealand Te Whatu Ora Shared Care FHIR API - Local Development build (v0.4.5) built by the FHIR (HL7® FHIR® Standard) Build Tools. See the Directory of published versions

Resource Profile: DHOPatientUpdate - Detailed Descriptions

Active as of 2026-04-02

Definitions for the DHOPatientUpdate resource profile.

Guidance on how to interpret the contents of this table can be foundhere

0. Patient
Definition

Demographics and other administrative information about an individual or animal receiving care or other health-related services.

ShortInformation about an individual or animal receiving health care services
Control0..*
Is Modifierfalse
Summaryfalse
Alternate NamesSubjectOfCare Client Resident
Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
dom-6: A resource should have narrative for robust management (text.`div`.exists())
nz-pat-1: only a single official NHI (Patient.identifier.where(system='https://standards.digital.health.nz/ns/nhi-id' and use='official').count() < 2)
2. Patient.implicitRules
Definition

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

ShortA set of rules under which this content was created
Comments

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

Control0..01
Typeuri
Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
4. Patient.language
Definition

The base language in which the resource is written.

ShortLanguage of the resource content
Comments

Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

Control0..01
BindingThe codes SHOULD be taken from CommonLanguageshttp://hl7.org/fhir/ValueSet/languages
(preferred to http://hl7.org/fhir/ValueSet/languages)

A human language.

Additional BindingsPurpose
AllLanguagesMax Binding
Typecode
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
6. Patient.extension:ethnicity
Slice Nameethnicity
Definition

The ethnic group or groups that a person identifies with or feels they belong to. Ethnicity is a measure of cultural affiliation as opposed to race, ancestry, nationality or citizen. Ethnicity is self-perceived and a person can belong to more than one group.

The Stats New Zealand standard can be found here.

ShortNZ Ethnicity
Control0..0
This element is affected by the following invariants: ele-1
TypeExtension(NZ Ethnicity) (Extension Type: CodeableConcept)
Is Modifierfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
11. Patient.extension:nzCitizen
Slice NamenzCitizen
Definition

This field is used to indicate the New Zealand citizenship status of the patient

ShortThis field indicates New Zealand citizenship status of the patient
Control0..1
This element is affected by the following invariants: ele-1
TypeExtension(NZ Citizenship) (Complex Extension)
Is Modifierfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
13. Patient.extension:nzCitizen.extension:status
Slice Namestatus
Definition

No description

ShortExtensionAdditional content defined by implementations
Control0..1*
TypeExtension
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
15. Patient.extension:nzCitizen.extension:status.extension
Definition

An Extension


May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortExtensionAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..0*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Patient.extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
  • value @ url
  • 17. Patient.extension:nzCitizen.extension:status.url
    Definition

    Source of the definition for the extension code - a logical name or a URL.

    Shortidentifies the meaning of the extension
    Comments

    The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

    Control1..1
    Typeuri
    Is Modifierfalse
    XML FormatIn the XML format, this property is represented as an attribute.
    Summaryfalse
    Fixed Valuestatus
    19. Patient.extension:nzCitizen.extension:source
    Slice Namesource
    Definition

    An Extension

    ShortExtensionAdditional content defined by implementations
    Control0..1*
    TypeExtension
    Is Modifierfalse
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    21. Patient.extension:nzCitizen.extension:source.extension
    Definition

    An Extension


    May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

    ShortExtensionAdditional content defined by implementations
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..0*
    TypeExtension
    Is Modifierfalse
    Summaryfalse
    Alternate Namesextensions, user content
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    SlicingThis element introduces a set of slices on Patient.extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
    • value @ url
    • 23. Patient.extension:nzCitizen.extension:source.url
      Definition

      Source of the definition for the extension code - a logical name or a URL.

      Shortidentifies the meaning of the extension
      Comments

      The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

      Control1..1
      Typeuri
      Is Modifierfalse
      XML FormatIn the XML format, this property is represented as an attribute.
      Summaryfalse
      Fixed Valuesource
      25. Patient.extension:nzCitizen.extension:source.value[x]
      Definition

      Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

      ShortValue of extension
      Control0..1
      BindingThe codes SHALL be taken from For codes, see https://nzhts.digital.health.nz/fhir/ValueSet/nz-citizenship-source-code
      (required to https://nzhts.digital.health.nz/fhir/ValueSet/nz-citizenship-source-code)
      TypeCodeableConcept, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time
      [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
      Is Modifierfalse
      Summaryfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      27. Patient.extension:nzCitizen.url
      Definition

      Source of the definition for the extension code - a logical name or a URL.

      Shortidentifies the meaning of the extension
      Comments

      The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

      Control1..1
      Typeuri
      Is Modifierfalse
      XML FormatIn the XML format, this property is represented as an attribute.
      Summaryfalse
      Fixed Valuehttp://hl7.org.nz/fhir/StructureDefinition/nz-citizenship
      29. Patient.extension:nzCitizen.value[x]
      Definition

      Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

      ShortValue of extension
      Control0..01
      TypeChoice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, ContactDetail, Contributor, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Dosage, Meta
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summaryfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      31. Patient.extension:dhb
      Slice Namedhb
      Definition

      District Health Board relating to a NZ Healthcare Service, Location (Facility) or Patient (primary, physical home address).

      ShortDistrict Health Board linked to a NZ Healthcare Service, Location or Patient
      Control0..1
      This element is affected by the following invariants: ele-1
      TypeExtension(District Health Board linked to a NZ Healthcare Service, Location or Patient) (Extension Type: CodeableConcept)
      Is Modifierfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      33. Patient.extension:domicile-code
      Slice Namedomicile-code
      Definition

      NZ Domicile Code. Derived from a patient's primary physical, home address.

      ShortNZ Domicile Code
      Control0..1
      This element is affected by the following invariants: ele-1
      TypeExtension(NZ Domicile Code) (Extension Type: CodeableConcept)
      Is Modifierfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      35. Patient.extension:pho
      Slice Namepho
      Definition

      Primary Healthcare Organisation associated with a General Practice linked to a NZ Healthcare Service, Location (Facility) or Patient (GP).

      ShortPrimary Healthcare Organisation
      Control0..1
      This element is affected by the following invariants: ele-1
      TypeExtension(Primary Healthcare Organisation) (Extension Type: CodeableConcept)
      Is Modifierfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      37. Patient.extension:sex-at-birth
      Slice Namesex-at-birth
      Definition

      A person’s sex at the time of their birth (considered to be immutable).

      ShortSex At Birth
      Control0..1
      This element is affected by the following invariants: ele-1
      TypeExtension(Sex At Birth) (Extension Type: CodeableConcept)
      Is Modifierfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      39. Patient.extension:iwi
      Slice Nameiwi
      Definition

      Persons Iwi affiliation

      ShortExtension
      Control0..*
      This element is affected by the following invariants: ele-1
      TypeExtension(Nz_iwi) (Extension Type: CodeableConcept)
      Is Modifierfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      41. Patient.extension:acc-patient-occupation
      Slice Nameacc-patient-occupation
      Definition

      Codes to describe a patient's occupation, using ACC's patient occupation codeset.

      Note that the current ValueSet binding contains codes from NZSC099. ACC are planning to update this ValueSet to base the codes on ANZSCO at the request of Stats NZ (Timing TBC), so the binding strength has been left as 'example'.

      ShortExtension
      Control0..1
      This element is affected by the following invariants: ele-1
      TypeExtension(AccPatientOccupation) (Extension Type: CodeableConcept)
      Is Modifierfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      43. Patient.extension:messaging-address
      Slice Namemessaging-address
      Definition

      The address to where electronic communications might be sent. For historical reasons, there is an overlap with edi-address.

      ShortMessaging Address
      Control0..*
      This element is affected by the following invariants: ele-1
      TypeExtension(Messaging Address) (Complex Extension)
      Is Modifierfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      45. Patient.extension:nz-residency
      Slice Namenz-residency
      Definition

      NZ Residency status

      ShortExtension
      Control0..1
      This element is affected by the following invariants: ele-1
      TypeExtension(NZResidency) (Complex Extension)
      Is Modifierfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      47. Patient.extension:interpreter-required
      Slice Nameinterpreter-required
      Definition

      Indicates whether an interpreter is required to facilitate communication in a healthcare setting. While this extension is named patient-interpreterRequired for backwards compatibility, it may also be used on RelatedPerson, Practitioner, and Encounter.

      ShortWhether an interpreter is required
      Comments

      The individual does not speak the default language of the organization, and hence requires an interpreter. If other languages are in the Communications list, then that would be the type of interpreter required.

      While this extension is named patient-interpreterRequired for backwards compatibility, it may also be used on RelatedPerson, Practitioner, and Encounter.

      When used on Patient, RelatedPerson, or Practitioner, it indicates a default or assumed need for an interpreter. When used on Encounter, it indicates that an interpreter is needed to facilitate communication between some participants in that Encounter. The encounter-level evaluation of whether an interpreter is needed might involve evaluating the language proficiencies of the participants.

      Control0..1
      TypeExtension(Interpreter Required) (Extension Type: boolean)
      Is Modifierfalse
      Summaryfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      49. Patient.modifierExtension
      Definition

      May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

      ShortExtensions that cannot be ignored
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
      Summaryfalse
      Requirements

      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

      Alternate Namesextensions, user content
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      51. Patient.identifier
      Definition

      An identifier for this patient.

      ShortAn identifier for this patient
      NoteThis is a business identifier, not a resource identifier (see discussion)
      Control0..*
      TypeIdentifier
      Is Modifierfalse
      Summarytrue
      Requirements

      Patients are almost always assigned specific numerical identifiers.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      SlicingThis element introduces a set of slices on Patient.identifier. The slices areUnordered and Open, and can be differentiated using the following discriminators:
      • value @ system
      • 53. Patient.identifier:NHI
        Slice NameNHI
        Definition

        An identifier for this patient.

        ShortAn identifier for this patient
        NoteThis is a business identifier, not a resource identifier (see discussion)
        Control0..*
        TypeIdentifier
        Is Modifierfalse
        Summarytrue
        Requirements

        Patients are almost always assigned specific numerical identifiers.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        55. Patient.identifier:NHI.use
        Definition

        The purpose of this identifier.

        Shortusual | official | temp | secondary | old (If known)
        Comments

        Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.

        Control0..1
        BindingThe codes SHALL be taken from Valid use values for NHIhttp://hl7.org/fhir/ValueSet/identifier-use|4.0.1
        (required to https://nzhts.digital.health.nz/fhir/ValueSet/nhi-use-code)
        Typecode
        Is Modifiertrue because This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one.
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Requirements

        Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        57. Patient.identifier:NHI.system
        Definition

        Establishes the namespace for the value - that is, a URL that describes a set values that are unique.

        ShortThe namespace for the identifier value
        Comments

        Identifier.system is always case sensitive.

        Control10..1
        Typeuri
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Requirements

        There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.

        Fixed Valuehttps://standards.digital.health.nz/ns/nhi-id
        ExampleGeneral: http://www.acme.com/identifiers/patient
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        59. Patient.active
        Definition

        Whether this patient record is in active use. Many systems use this property to mark as non-current patients, such as those that have not been seen for a period of time based on an organization's business rules.

        It is often used to filter patient lists to exclude inactive patients

        Deceased patients may also be marked as inactive for the same reasons, but may be active for some time after death.

        ShortWhether this patient's record is in active use
        Comments

        If a record is inactive, and linked to an active record, then future patient/record updates should occur on the other patient.

        Control0..1
        Typeboolean
        Is Modifiertrue because This element is labelled as a modifier because it is a status element that can indicate that a record should not be treated as valid
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Requirements

        Need to be able to mark a patient record as not to be used because it was created in error.

        Meaning if MissingThis resource is generally assumed to be active if no value is provided for the active element
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        61. Patient.name
        Definition

        A name associated with the individual.

        ShortA name associated with the patient
        Comments

        A patient may have multiple names with different uses or applicable periods. For animals, the name is a "HumanName" in the sense that is assigned and used by humans and has the same patterns.

        Control0..0*
        TypeHumanName
        Is Modifierfalse
        Summarytrue
        Requirements

        Need to be able to track the patient by multiple names. Examples are your official name and a partner name.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        65. Patient.telecom
        Definition

        Details for all kinds of technology mediated contact points for a person or organization, including telephone, email, etc.


        A contact detail (e.g. a telephone number or an email address) by which the individual may be contacted.

        ShortDetails of a Technology mediated contact point (phone, fax, email, etc.)A contact detail for the individual
        Comments

        A Patient may have multiple ways to be contacted with different uses or applicable periods. May need to have options for contacting the person urgently and also to help with identification. The address might not go directly to the individual, but may reach another party that is able to proxy for the patient (i.e. home phone, or pet owner's phone).

        Control10..*
        This element is affected by the following invariants: ele-1
        TypeContactPoint(Common NZ ContactPoint datatype)
        Is Modifierfalse
        Must Supporttrue
        Requirements

        People have (primary) ways to contact them in some way such as phone, email.

        Invariantscpt-2: A system is required if a value is provided. (value.empty() or system.exists())
        ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        dho-telecom-notification-valid-system: The notification-enabled extension should only be present when the telecom system is 'email', 'sms', or 'phone' with use 'mobile'. (extension.where(url = 'https://fhir-ig.digital.health.nz/shared-care/StructureDefinition/dho-telecom-notification').exists() implies (system = 'email' or system = 'sms' or (system = 'phone' and use = 'mobile')))
        67. Patient.telecom.id
        Definition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..01
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        69. Patient.telecom.extension:cp-purpose
        Slice Namecp-purpose
        Definition

        A specific purpose for which this ContactPoint dataType would be used. An example would be to indicate that this ContactPoint is used for video conferencing.

        ShortA specific purpose for which this ContactPoint dataType would be used
        Control0..0
        TypeExtension(A specific purpose for which this ContactPoint dataType would be used) (Extension Type: CodeableConcept)
        Is Modifierfalse
        Summaryfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        71. Patient.telecom.extension:notification-enabled
        Slice Namenotification-enabled
        Definition

        Indicates whether notifications can be sent to this telecom point. Used when the system type is 'email', 'sms', or 'phone' with use 'mobile'.

        ShortTrue if notifications can be sent to this email or SMS address
        Control0..1
        TypeExtension(DHO Telecom Notification Enabled) (Extension Type: boolean)
        Is Modifierfalse
        Must Supporttrue
        Summaryfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        73. Patient.telecom.system
        Definition

        Telecommunications form for contact point - what communications system is required to make use of the contact.

        Shortphone | fax | email | pager | url | sms | other
        Control10..1
        This element is affected by the following invariants: cpt-2
        BindingThe codes SHALL be taken from ContactPointSystemhttp://hl7.org/fhir/ValueSet/contact-point-system|4.0.1
        (required to http://hl7.org/fhir/ValueSet/contact-point-system|4.0.1)

        Telecommunications form for contact point.

        Typecode
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Must Supporttrue
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        75. Patient.telecom.value
        Definition

        The actual contact point details, in a form that is meaningful to the designated communication system (i.e. phone number or email address).

        ShortThe actual contact point details
        Comments

        Additional text data such as phone extension numbers, or notes about use of the contact are sometimes included in the value.

        Control10..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Must Supporttrue
        Summarytrue
        Requirements

        Need to support legacy numbers that are not in a tightly controlled format.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        77. Patient.telecom.use
        Definition

        The purpose of this contact point - constrained to home | work | mobile


        Identifies the purpose for the contact point.

        Shorthome | work | mobilehome | work | temp | old | mobile - purpose of this contact point
        Comments

        Applications can assume that a contact is current unless it explicitly says that it is temporary or old.

        Control10..1
        BindingThe codes SHALL be taken from ContactPointUsehttp://hl7.org/fhir/ValueSet/contact-point-use|4.0.1
        (required to http://hl7.org/fhir/ValueSet/contact-point-use|4.0.1)

        Use of contact point.

        Typecode
        Is Modifiertrue because This is labeled as "Is Modifier" because applications should not mistake a temporary or old contact etc.for a current/permanent one
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Must Supporttrue
        Summarytrue
        Requirements

        Need to track the way a person uses this contact, so a user can choose which is appropriate for their purpose.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        79. Patient.telecom.period
        Definition

        Time period when the contact point was/is in use.

        ShortTime period when the contact point was/is in use
        Control0..01
        TypePeriod
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        81. Patient.birthDate
        Definition

        The date of birth for the individual.

        ShortThe date of birth for the individual
        Comments

        At least an estimated year should be provided as a guess if the real DOB is unknown There is a standard extension "patient-birthTime" available that should be used where Time is required (such as in maternity/infant care systems).

        Control0..01
        Typedate
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Requirements

        Age of the individual drives many clinical processes.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        LOINC Code21112-8
        84. Patient.deceased[x]
        Definition

        Indicates if the individual is deceased or not.

        ShortIndicates if the individual is deceased or not
        Comments

        If there's no value in the instance, it means there is no statement on whether or not the individual is deceased. Most systems will interpret the absence of a value as a sign of the person being alive.

        Control0..1
        TypedateTime, boolean
        [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
        Is Modifiertrue because This element is labeled as a modifier because once a patient is marked as deceased, the actions that are appropriate to perform on the patient may be significantly different.
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Requirements

        The fact that a patient is deceased influences the clinical process. Also, in human communication and relation management it is necessary to know whether the person is alive.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        SlicingThis element introduces a set of slices on Patient.deceased[x]. The slices areUnordered and Closed, and can be differentiated using the following discriminators:
        • type @ $this
        • 86. Patient.deceased[x]:deceasedBoolean
          Slice NamedeceasedBoolean
          Definition

          Indicates if the individual is deceased or not.

          ShortIndicates if the individual is deceased or not
          Comments

          If there's no value in the instance, it means there is no statement on whether or not the individual is deceased. Most systems will interpret the absence of a value as a sign of the person being alive.

          Control0..01
          Typeboolean, dateTime
          Is Modifiertrue because This element is labeled as a modifier because once a patient is marked as deceased, the actions that are appropriate to perform on the patient may be significantly different.
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Requirements

          The fact that a patient is deceased influences the clinical process. Also, in human communication and relation management it is necessary to know whether the person is alive.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          88. Patient.deceased[x]:deceasedDateTime
          Slice NamedeceasedDateTime
          Definition

          Indicates if the individual is deceased or not.

          ShortIndicates if the individual is deceased or not
          Comments

          If there's no value in the instance, it means there is no statement on whether or not the individual is deceased. Most systems will interpret the absence of a value as a sign of the person being alive.

          Control0..1
          TypedateTime, boolean
          [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
          Is Modifiertrue because This element is labeled as a modifier because once a patient is marked as deceased, the actions that are appropriate to perform on the patient may be significantly different.
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Requirements

          The fact that a patient is deceased influences the clinical process. Also, in human communication and relation management it is necessary to know whether the person is alive.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          90. Patient.deceased[x]:deceasedDateTime.extension:information-source
          Slice Nameinformation-source
          Definition

          The official source of information held about a patient.

          ShortInformation Source
          Control0..1
          This element is affected by the following invariants: ele-1
          TypeExtension(Information Source) (Extension Type: CodeableConcept)
          Is Modifierfalse
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          92. Patient.address
          Definition

          An address expressed using postal conventions (as opposed to GPS or other location definition formats). This data type may be used to convey addresses for use in delivering mail as well as for visiting locations which might not be valid for mail delivery. There are a variety of postal address formats defined around the world.


          An address for the individual.

          ShortAn address expressed using postal conventions (as opposed to GPS or other location definition formats)An address for the individual
          Comments

          Note: address is intended to describe postal addresses for administrative purposes, not to describe absolute geographical coordinates. Postal addresses are often used as proxies for physical locations (also see the Location resource).


          Patient may have multiple addresses with different uses or applicable periods.

          Control0..0*
          This element is affected by the following invariants: ele-1
          TypeAddress(Common NZ Address datatype)
          Is Modifierfalse
          Requirements

          May need to keep track of patient addresses for contacting, billing or reporting requirements and also to help with identification.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          94. Patient.maritalStatus
          Definition

          This field contains a patient's most recent marital (civil) status.

          ShortMarital (civil) status of a patient
          Control0..01
          BindingUnless not suitable, these codes SHALL be taken from Marital Status Codeshttp://hl7.org/fhir/ValueSet/marital-status
          (extensible to http://hl7.org/fhir/ValueSet/marital-status)

          The domestic partnership status of a person.

          TypeCodeableConcept
          Is Modifierfalse
          Summaryfalse
          Requirements

          Most, if not all systems capture it.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          96. Patient.multipleBirth[x]
          Definition

          Indicates whether the patient is part of a multiple (boolean) or indicates the actual birth order (integer).

          ShortWhether patient is part of a multiple birth
          Comments

          Where the valueInteger is provided, the number is the birth number in the sequence. E.g. The middle birth in triplets would be valueInteger=2 and the third born would have valueInteger=3 If a boolean value was provided for this triplets example, then all 3 patient records would have valueBoolean=true (the ordering is not indicated).

          Control0..1
          Typeinteger, boolean
          [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summaryfalse
          Requirements

          For disambiguation of multiple-birth children, especially relevant where the care provider doesn't meet the patient, such as labs.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          SlicingThis element introduces a set of slices on Patient.multipleBirth[x]. The slices areUnordered and Open, and can be differentiated using the following discriminators:
          • type @ $this
          • 98. Patient.multipleBirth[x]:multipleBirthBoolean
            Slice NamemultipleBirthBoolean
            Definition

            Indicates whether the patient is part of a multiple (boolean) or indicates the actual birth order (integer).

            ShortWhether patient is part of a multiple birth
            Comments

            Where the valueInteger is provided, the number is the birth number in the sequence. E.g. The middle birth in triplets would be valueInteger=2 and the third born would have valueInteger=3 If a boolean value was provided for this triplets example, then all 3 patient records would have valueBoolean=true (the ordering is not indicated).

            Control0..01
            Typeboolean, integer
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Summaryfalse
            Requirements

            For disambiguation of multiple-birth children, especially relevant where the care provider doesn't meet the patient, such as labs.

            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            100. Patient.photo
            Definition

            Image of the patient.

            ShortImage of the patient
            Comments

            Guidelines:

            • Use id photos, not clinical photos.
            • Limit dimensions to thumbnail.
            • Keep byte count low to ease resource updates.
            Control0..0*
            TypeAttachment
            Is Modifierfalse
            Summaryfalse
            Requirements

            Many EHR systems have the capability to capture an image of the patient. Fits with newer social media usage too.

            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            102. Patient.contact
            Definition

            A contact party (e.g. guardian, partner, friend) for the patient.

            ShortA contact party (e.g. guardian, partner, friend) for the patient
            Comments

            Contact covers all kinds of contact parties: family members, business contacts, guardians, caregivers. Not applicable to register pedigree and family ties beyond use of having contact.

            Control0..0*
            TypeBackboneElement
            Is Modifierfalse
            Summaryfalse
            Requirements

            Need to track people you can contact about the patient.

            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            pat-1: SHALL at least contain a contact's details or a reference to an organization (name.exists() or telecom.exists() or address.exists() or organization.exists())
            pat-1: SHALL at least contain a contact's details or a reference to an organization (name.exists() or telecom.exists() or address.exists() or organization.exists())
            105. Patient.communication
            Definition

            A language which may be used to communicate with the patient about his or her health.

            ShortA language which may be used to communicate with the patient about his or her health
            Comments

            If no language is specified, this implies that the default local language is spoken. If you need to convey proficiency for multiple modes, then you need multiple Patient.Communication associations. For animals, language is not a relevant field, and should be absent from the instance. If the Patient does not speak the default local language, then the Interpreter Required Standard can be used to explicitly declare that an interpreter is required.

            Control0..0*
            TypeBackboneElement
            Is Modifierfalse
            Summaryfalse
            Requirements

            If a patient does not speak the local language, interpreters may be required, so languages spoken and proficiency are important things to keep track of both for patient and other persons of interest.

            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            109. Patient.generalPractitioner
            Definition

            Patient's nominated care provider.

            ShortPatient's nominated primary care provider
            Comments

            This may be the primary care provider (in a GP context), or it may be a patient nominated care manager in a community/disability setting, or even organization that will provide people to perform the care provider roles. It is not to be used to record Care Teams, these should be in a CareTeam resource that may be linked to the CarePlan or EpisodeOfCare resources. Multiple GPs may be recorded against the patient for various reasons, such as a student that has his home GP listed along with the GP at university during the school semesters, or a "fly-in/fly-out" worker that has the onsite GP also included with his home GP to remain aware of medical issues.

            Jurisdictions may decide that they can profile this down to 1 if desired, or 1 per type.

            Control0..0*
            TypeReference(Organization, Practitioner, PractitionerRole)
            Is Modifierfalse
            Summaryfalse
            Alternate NamescareProvider
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            111. Patient.managingOrganization
            Definition

            Organization that is the custodian of the patient record.

            ShortOrganization that is the custodian of the patient record
            Comments

            There is only one managing organization for a specific patient record. Other organizations will have their own Patient record, and may use the Link property to join the records together (or a Person resource which can include confidence ratings for the association).

            Control0..01
            TypeReference(Organization)
            Is Modifierfalse
            Summarytrue
            Requirements

            Need to know who recognizes this patient record, manages and updates it.

            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            113. Patient.link
            Definition

            Link to another patient resource that concerns the same actual patient.

            ShortLink to another patient resource that concerns the same actual person
            Comments

            There is no assumption that linked patient records have mutual links.

            Control0..0*
            TypeBackboneElement
            Is Modifiertrue because This element is labeled as a modifier because it might not be the main Patient resource, and the referenced patient should be used instead of this Patient record. This is when the link.type value is 'replaced-by'
            Summarytrue
            Requirements

            There are multiple use cases:

            • Duplicate patient records due to the clerical errors associated with the difficulties of identifying humans consistently, and
            • Distribution of patient information across multiple servers.
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

            Guidance on how to interpret the contents of this table can be foundhere

            0. Patient
            2. Patient.meta
            4. Patient.meta.source
            Definition

            Captures the source of the record. This must contain the HPIFacilityID e.g. https://standards.digital.health.nz/ns/hpi-facility-id/FZZ111-A

            ShortHPI Facility ID from where the record is sourced
            Control1..?
            6. Patient.meta.tag
            ShortCorrelation-id where the record is sourced
            Control1..?
            SlicingThis element introduces a set of slices on Patient.meta.tag. The slices areUnordered and Open, and can be differentiated using the following discriminators:
            • value @ system
            • 8. Patient.meta.tag:correlationId
              Slice NamecorrelationId
              Control1..1
              10. Patient.meta.tag:correlationId.system
              Control1..?
              Fixed Valuehttps://hub.services.digital.health.nz/ns/correlation-id
              12. Patient.meta.tag:correlationId.code
              Control1..?
              14. Patient.implicitRules
              Control0..0
              16. Patient.language
              Control0..0
              18. Patient.extension:ethnicity
              Slice Nameethnicity
              Control0..0
              21. Patient.extension:nzCitizen
              Slice NamenzCitizen
              Definition

              This field is used to indicate the New Zealand citizenship status of the patient

              ShortThis field indicates New Zealand citizenship status of the patient
              23. Patient.extension:nzCitizen.extension:source
              Slice Namesource
              25. Patient.extension:nzCitizen.extension:source.value[x]
              BindingThe codes SHALL be taken from https://nzhts.digital.health.nz/fhir/ValueSet/nz-citizenship-source-code
              (required to https://nzhts.digital.health.nz/fhir/ValueSet/nz-citizenship-source-code)
              [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
              27. Patient.extension:interpreter-required
              Slice Nameinterpreter-required
              Control0..1
              TypeExtension(Interpreter Required) (Extension Type: boolean)
              29. Patient.name
              Control0..0
              31. Patient.telecom
              Control1..?
              Must Supporttrue
              Invariantsdho-telecom-notification-valid-system: The notification-enabled extension should only be present when the telecom system is 'email', 'sms', or 'phone' with use 'mobile'. (extension.where(url = 'https://fhir-ig.digital.health.nz/shared-care/StructureDefinition/dho-telecom-notification').exists() implies (system = 'email' or system = 'sms' or (system = 'phone' and use = 'mobile')))
              33. Patient.telecom.id
              Control0..0
              35. Patient.telecom.extension:cp-purpose
              Slice Namecp-purpose
              Control0..0
              37. Patient.telecom.extension:notification-enabled
              Slice Namenotification-enabled
              ShortTrue if notifications can be sent to this email or SMS address
              Control0..1
              TypeExtension(DHO Telecom Notification Enabled) (Extension Type: boolean)
              Must Supporttrue
              39. Patient.telecom.system
              Control1..?
              Must Supporttrue
              41. Patient.telecom.value
              Control1..?
              Must Supporttrue
              43. Patient.telecom.use
              Definition

              The purpose of this contact point - constrained to home | work | mobile

              Shorthome | work | mobile
              Control1..?
              Must Supporttrue
              45. Patient.telecom.period
              Control0..0
              47. Patient.birthDate
              Control0..0
              LOINC Code
              49. Patient.deceased[x]:deceasedBoolean
              Slice NamedeceasedBoolean
              Control0..0
              Typeboolean
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              51. Patient.address
              Control0..0
              53. Patient.maritalStatus
              Control0..0
              55. Patient.multipleBirth[x]
              [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
              SlicingThis element introduces a set of slices on Patient.multipleBirth[x]. The slices areUnordered and Open, and can be differentiated using the following discriminators:
              • type @ $this
              • 57. Patient.multipleBirth[x]:multipleBirthBoolean
                Slice NamemultipleBirthBoolean
                Control0..0
                Typeboolean
                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                59. Patient.photo
                Control0..0
                61. Patient.contact
                Control0..0
                63. Patient.communication
                Control0..0
                65. Patient.generalPractitioner
                Control0..0
                67. Patient.managingOrganization
                Control0..0
                69. Patient.link
                Control0..0

                Guidance on how to interpret the contents of this table can be foundhere

                0. Patient
                Definition

                Demographics and other administrative information about an individual or animal receiving care or other health-related services.

                ShortInformation about an individual or animal receiving health care services
                Control0..*
                Is Modifierfalse
                Summaryfalse
                Alternate NamesSubjectOfCare Client Resident
                Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
                dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
                dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
                dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
                dom-6: A resource should have narrative for robust management (text.`div`.exists())
                nz-pat-1: only a single official NHI (Patient.identifier.where(system='https://standards.digital.health.nz/ns/nhi-id' and use='official').count() < 2)
                2. Patient.id
                Definition

                The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

                ShortLogical id of this artifact
                Comments

                The only time that a resource does not have an id is when it is being submitted to the server using a create operation.

                Control0..1
                Typeid
                Is Modifierfalse
                Summarytrue
                4. Patient.meta
                Definition

                The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource.

                ShortMetadata about the resource
                Control0..1
                TypeMeta
                Is Modifierfalse
                Summarytrue
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                6. Patient.meta.id
                Definition

                Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                ShortUnique id for inter-element referencing
                Control0..1
                Typestring
                Is Modifierfalse
                XML FormatIn the XML format, this property is represented as an attribute.
                Summaryfalse
                8. Patient.meta.extension
                Definition

                May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                ShortAdditional content defined by implementations
                Comments

                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                Control0..*
                TypeExtension
                Is Modifierfalse
                Summaryfalse
                Alternate Namesextensions, user content
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                SlicingThis element introduces a set of slices on Patient.meta.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                • value @ url
                • 10. Patient.meta.versionId
                  Definition

                  The version specific identifier, as it appears in the version portion of the URL. This value changes when the resource is created, updated, or deleted.

                  ShortVersion specific identifier
                  Comments

                  The server assigns this value, and ignores what the client specifies, except in the case that the server is imposing version integrity on updates/deletes.

                  Control0..1
                  Typeid
                  Is Modifierfalse
                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                  Summarytrue
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  12. Patient.meta.lastUpdated
                  Definition

                  When the resource last changed - e.g. when the version changed.

                  ShortWhen the resource version last changed
                  Comments

                  This value is always populated except when the resource is first being created. The server / resource manager sets this value; what a client provides is irrelevant. This is equivalent to the HTTP Last-Modified and SHOULD have the same value on a read interaction.

                  Control0..1
                  Typeinstant
                  Is Modifierfalse
                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                  Summarytrue
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  14. Patient.meta.source
                  Definition

                  Captures the source of the record. This must contain the HPIFacilityID e.g. https://standards.digital.health.nz/ns/hpi-facility-id/FZZ111-A

                  ShortHPI Facility ID from where the record is sourced
                  Comments

                  In the provenance resource, this corresponds to Provenance.entity.what[x]. The exact use of the source (and the implied Provenance.entity.role) is left to implementer discretion. Only one nominated source is allowed; for additional provenance details, a full Provenance resource should be used.

                  This element can be used to indicate where the current master source of a resource that has a canonical URL if the resource is no longer hosted at the canonical URL.

                  Control1..1
                  Typeuri
                  Is Modifierfalse
                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                  Summarytrue
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  16. Patient.meta.profile
                  Definition

                  A list of profiles (references to StructureDefinition resources) that this resource claims to conform to. The URL is a reference to StructureDefinition.url.

                  ShortProfiles this resource claims to conform to
                  Comments

                  It is up to the server and/or other infrastructure of policy to determine whether/how these claims are verified and/or updated over time. The list of profile URLs is a set.

                  Control0..*
                  Typecanonical(StructureDefinition)
                  Is Modifierfalse
                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                  Summarytrue
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  18. Patient.meta.security
                  Definition

                  Security labels applied to this resource. These tags connect specific resources to the overall security policy and infrastructure.

                  ShortSecurity Labels applied to this resource
                  Comments

                  The security labels can be updated without changing the stated version of the resource. The list of security labels is a set. Uniqueness is based the system/code, and version and display are ignored.

                  Control0..*
                  BindingUnless not suitable, these codes SHALL be taken from All Security Labels
                  (extensible to http://hl7.org/fhir/ValueSet/security-labels)

                  Security Labels from the Healthcare Privacy and Security Classification System.

                  TypeCoding
                  Is Modifierfalse
                  Summarytrue
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  20. Patient.meta.tag
                  Definition

                  Tags applied to this resource. Tags are intended to be used to identify and relate resources to process and workflow, and applications are not required to consider the tags when interpreting the meaning of a resource.

                  ShortCorrelation-id where the record is sourced
                  Comments

                  The tags can be updated without changing the stated version of the resource. The list of tags is a set. Uniqueness is based the system/code, and version and display are ignored.

                  Control1..*
                  BindingFor example codes, see CommonTags
                  (example to http://hl7.org/fhir/ValueSet/common-tags)

                  Codes that represent various types of tags, commonly workflow-related; e.g. "Needs review by Dr. Jones".

                  TypeCoding
                  Is Modifierfalse
                  Summarytrue
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  SlicingThis element introduces a set of slices on Patient.meta.tag. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                  • value @ system
                  • 22. Patient.meta.tag:correlationId
                    Slice NamecorrelationId
                    Definition

                    Tags applied to this resource. Tags are intended to be used to identify and relate resources to process and workflow, and applications are not required to consider the tags when interpreting the meaning of a resource.

                    ShortTags applied to this resource
                    Comments

                    The tags can be updated without changing the stated version of the resource. The list of tags is a set. Uniqueness is based the system/code, and version and display are ignored.

                    Control1..1
                    BindingFor example codes, see CommonTags
                    (example to http://hl7.org/fhir/ValueSet/common-tags)

                    Codes that represent various types of tags, commonly workflow-related; e.g. "Needs review by Dr. Jones".

                    TypeCoding
                    Is Modifierfalse
                    Summarytrue
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    24. Patient.meta.tag:correlationId.id
                    Definition

                    Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                    ShortUnique id for inter-element referencing
                    Control0..1
                    Typestring
                    Is Modifierfalse
                    XML FormatIn the XML format, this property is represented as an attribute.
                    Summaryfalse
                    26. Patient.meta.tag:correlationId.extension
                    Definition

                    May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                    ShortAdditional content defined by implementations
                    Comments

                    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                    Control0..*
                    TypeExtension
                    Is Modifierfalse
                    Summaryfalse
                    Alternate Namesextensions, user content
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                    SlicingThis element introduces a set of slices on Patient.meta.tag.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                    • value @ url
                    • 28. Patient.meta.tag:correlationId.system
                      Definition

                      The identification of the code system that defines the meaning of the symbol in the code.

                      ShortIdentity of the terminology system
                      Comments

                      The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously.

                      Control1..1
                      Typeuri
                      Is Modifierfalse
                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                      Summarytrue
                      Requirements

                      Need to be unambiguous about the source of the definition of the symbol.

                      Fixed Valuehttps://hub.services.digital.health.nz/ns/correlation-id
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      30. Patient.meta.tag:correlationId.version
                      Definition

                      The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured, and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged.

                      ShortVersion of the system - if relevant
                      Comments

                      Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date.

                      NoteThis is a business version Id, not a resource version Id (see discussion)
                      Control0..1
                      Typestring
                      Is Modifierfalse
                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                      Summarytrue
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      32. Patient.meta.tag:correlationId.code
                      Definition

                      A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination).

                      ShortSymbol in syntax defined by the system
                      Control1..1
                      Typecode
                      Is Modifierfalse
                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                      Summarytrue
                      Requirements

                      Need to refer to a particular code in the system.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      34. Patient.meta.tag:correlationId.display
                      Definition

                      A representation of the meaning of the code in the system, following the rules of the system.

                      ShortRepresentation defined by the system
                      Control0..1
                      Typestring
                      Is Modifierfalse
                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                      Summarytrue
                      Requirements

                      Need to be able to carry a human-readable meaning of the code for readers that do not know the system.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      36. Patient.meta.tag:correlationId.userSelected
                      Definition

                      Indicates that this coding was chosen by a user directly - e.g. off a pick list of available items (codes or displays).

                      ShortIf this coding was chosen directly by the user
                      Comments

                      Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely.

                      Control0..1
                      Typeboolean
                      Is Modifierfalse
                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                      Summarytrue
                      Requirements

                      This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      38. Patient.implicitRules
                      Definition

                      A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

                      ShortA set of rules under which this content was created
                      Comments

                      Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

                      Control0..0
                      Typeuri
                      Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                      Summarytrue
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      40. Patient.language
                      Definition

                      The base language in which the resource is written.

                      ShortLanguage of the resource content
                      Comments

                      Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

                      Control0..0
                      BindingThe codes SHOULD be taken from CommonLanguages
                      (preferred to http://hl7.org/fhir/ValueSet/languages)

                      A human language.

                      Additional BindingsPurpose
                      AllLanguagesMax Binding
                      Typecode
                      Is Modifierfalse
                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                      Summaryfalse
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      42. Patient.text
                      Definition

                      A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.

                      ShortText summary of the resource, for human interpretation
                      Comments

                      Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later.

                      Control0..1
                      TypeNarrative
                      Is Modifierfalse
                      Summaryfalse
                      Alternate Namesnarrative, html, xhtml, display
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      44. Patient.contained
                      Definition

                      These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope.

                      ShortContained, inline Resources
                      Comments

                      This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels.

                      Control0..*
                      TypeResource
                      Is Modifierfalse
                      Summaryfalse
                      Alternate Namesinline resources, anonymous resources, contained resources
                      46. Patient.extension
                      Definition

                      An Extension

                      ShortExtension
                      Control0..*
                      TypeExtension
                      Is Modifierfalse
                      Summaryfalse
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                      SlicingThis element introduces a set of slices on Patient.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                      • value @ url
                      • 48. Patient.extension:ethnicity
                        Slice Nameethnicity
                        Definition

                        The ethnic group or groups that a person identifies with or feels they belong to. Ethnicity is a measure of cultural affiliation as opposed to race, ancestry, nationality or citizen. Ethnicity is self-perceived and a person can belong to more than one group.

                        The Stats New Zealand standard can be found here.

                        ShortNZ Ethnicity
                        Control0..0
                        This element is affected by the following invariants: ele-1
                        TypeExtension(NZ Ethnicity) (Extension Type: CodeableConcept)
                        Is Modifierfalse
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                        54. Patient.extension:nzCitizen
                        Slice NamenzCitizen
                        Definition

                        This field is used to indicate the New Zealand citizenship status of the patient

                        ShortThis field indicates New Zealand citizenship status of the patient
                        Control0..1
                        This element is affected by the following invariants: ele-1
                        TypeExtension(NZ Citizenship) (Complex Extension)
                        Is Modifierfalse
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                        56. Patient.extension:nzCitizen.id
                        Definition

                        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                        ShortUnique id for inter-element referencing
                        Control0..1
                        Typestring
                        Is Modifierfalse
                        XML FormatIn the XML format, this property is represented as an attribute.
                        Summaryfalse
                        58. Patient.extension:nzCitizen.extension
                        Definition

                        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                        ShortAdditional content defined by implementations
                        Comments

                        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                        Control0..*
                        TypeExtension
                        Is Modifierfalse
                        Summaryfalse
                        Alternate Namesextensions, user content
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                        SlicingThis element introduces a set of slices on Patient.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                        • value @ url
                        • 60. Patient.extension:nzCitizen.extension:status
                          Slice Namestatus
                          Definition

                          No description

                          ShortExtension
                          Control0..1
                          TypeExtension
                          Is Modifierfalse
                          Summaryfalse
                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                          62. Patient.extension:nzCitizen.extension:status.id
                          Definition

                          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                          ShortUnique id for inter-element referencing
                          Control0..1
                          Typestring
                          Is Modifierfalse
                          XML FormatIn the XML format, this property is represented as an attribute.
                          Summaryfalse
                          64. Patient.extension:nzCitizen.extension:status.extension
                          Definition

                          An Extension

                          ShortExtension
                          Control0..0
                          TypeExtension
                          Is Modifierfalse
                          Summaryfalse
                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                          SlicingThis element introduces a set of slices on Patient.extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                          • value @ url
                          • 66. Patient.extension:nzCitizen.extension:status.url
                            Definition

                            Source of the definition for the extension code - a logical name or a URL.

                            Shortidentifies the meaning of the extension
                            Comments

                            The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

                            Control1..1
                            Typeuri
                            Is Modifierfalse
                            XML FormatIn the XML format, this property is represented as an attribute.
                            Summaryfalse
                            Fixed Valuestatus
                            68. Patient.extension:nzCitizen.extension:status.value[x]
                            Definition

                            Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

                            ShortValue of extension
                            Control0..1
                            BindingThe codes SHOULD be taken from NZ Citizenship status
                            (preferred to https://nzhts.digital.health.nz/fhir/ValueSet/nz-citizenship-status-code)
                            TypeCodeableConcept
                            [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                            Is Modifierfalse
                            Summaryfalse
                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            70. Patient.extension:nzCitizen.extension:source
                            Slice Namesource
                            Definition

                            An Extension

                            ShortExtension
                            Control0..1
                            TypeExtension
                            Is Modifierfalse
                            Summaryfalse
                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                            72. Patient.extension:nzCitizen.extension:source.id
                            Definition

                            Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                            ShortUnique id for inter-element referencing
                            Control0..1
                            Typestring
                            Is Modifierfalse
                            XML FormatIn the XML format, this property is represented as an attribute.
                            Summaryfalse
                            74. Patient.extension:nzCitizen.extension:source.extension
                            Definition

                            An Extension

                            ShortExtension
                            Control0..0
                            TypeExtension
                            Is Modifierfalse
                            Summaryfalse
                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                            SlicingThis element introduces a set of slices on Patient.extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                            • value @ url
                            • 76. Patient.extension:nzCitizen.extension:source.url
                              Definition

                              Source of the definition for the extension code - a logical name or a URL.

                              Shortidentifies the meaning of the extension
                              Comments

                              The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

                              Control1..1
                              Typeuri
                              Is Modifierfalse
                              XML FormatIn the XML format, this property is represented as an attribute.
                              Summaryfalse
                              Fixed Valuesource
                              78. Patient.extension:nzCitizen.extension:source.value[x]
                              Definition

                              Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

                              ShortValue of extension
                              Control0..1
                              BindingThe codes SHALL be taken from https://nzhts.digital.health.nz/fhir/ValueSet/nz-citizenship-source-code
                              (required to https://nzhts.digital.health.nz/fhir/ValueSet/nz-citizenship-source-code)
                              TypeCodeableConcept
                              [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                              Is Modifierfalse
                              Summaryfalse
                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              80. Patient.extension:nzCitizen.url
                              Definition

                              Source of the definition for the extension code - a logical name or a URL.

                              Shortidentifies the meaning of the extension
                              Comments

                              The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

                              Control1..1
                              Typeuri
                              Is Modifierfalse
                              XML FormatIn the XML format, this property is represented as an attribute.
                              Summaryfalse
                              Fixed Valuehttp://hl7.org.nz/fhir/StructureDefinition/nz-citizenship
                              82. Patient.extension:nzCitizen.value[x]
                              Definition

                              Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

                              ShortValue of extension
                              Control0..0
                              TypeChoice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, ContactDetail, Contributor, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Dosage, Meta
                              Is Modifierfalse
                              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                              Summaryfalse
                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              84. Patient.extension:dhb
                              Slice Namedhb
                              Definition

                              District Health Board relating to a NZ Healthcare Service, Location (Facility) or Patient (primary, physical home address).

                              ShortDistrict Health Board linked to a NZ Healthcare Service, Location or Patient
                              Control0..1
                              This element is affected by the following invariants: ele-1
                              TypeExtension(District Health Board linked to a NZ Healthcare Service, Location or Patient) (Extension Type: CodeableConcept)
                              Is Modifierfalse
                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                              86. Patient.extension:domicile-code
                              Slice Namedomicile-code
                              Definition

                              NZ Domicile Code. Derived from a patient's primary physical, home address.

                              ShortNZ Domicile Code
                              Control0..1
                              This element is affected by the following invariants: ele-1
                              TypeExtension(NZ Domicile Code) (Extension Type: CodeableConcept)
                              Is Modifierfalse
                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                              88. Patient.extension:pho
                              Slice Namepho
                              Definition

                              Primary Healthcare Organisation associated with a General Practice linked to a NZ Healthcare Service, Location (Facility) or Patient (GP).

                              ShortPrimary Healthcare Organisation
                              Control0..1
                              This element is affected by the following invariants: ele-1
                              TypeExtension(Primary Healthcare Organisation) (Extension Type: CodeableConcept)
                              Is Modifierfalse
                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                              90. Patient.extension:sex-at-birth
                              Slice Namesex-at-birth
                              Definition

                              A person’s sex at the time of their birth (considered to be immutable).

                              ShortSex At Birth
                              Control0..1
                              This element is affected by the following invariants: ele-1
                              TypeExtension(Sex At Birth) (Extension Type: CodeableConcept)
                              Is Modifierfalse
                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                              92. Patient.extension:iwi
                              Slice Nameiwi
                              Definition

                              Persons Iwi affiliation

                              ShortExtension
                              Control0..*
                              This element is affected by the following invariants: ele-1
                              TypeExtension(Nz_iwi) (Extension Type: CodeableConcept)
                              Is Modifierfalse
                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                              94. Patient.extension:acc-patient-occupation
                              Slice Nameacc-patient-occupation
                              Definition

                              Codes to describe a patient's occupation, using ACC's patient occupation codeset.

                              Note that the current ValueSet binding contains codes from NZSC099. ACC are planning to update this ValueSet to base the codes on ANZSCO at the request of Stats NZ (Timing TBC), so the binding strength has been left as 'example'.

                              ShortExtension
                              Control0..1
                              This element is affected by the following invariants: ele-1
                              TypeExtension(AccPatientOccupation) (Extension Type: CodeableConcept)
                              Is Modifierfalse
                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                              96. Patient.extension:messaging-address
                              Slice Namemessaging-address
                              Definition

                              The address to where electronic communications might be sent. For historical reasons, there is an overlap with edi-address.

                              ShortMessaging Address
                              Control0..*
                              This element is affected by the following invariants: ele-1
                              TypeExtension(Messaging Address) (Complex Extension)
                              Is Modifierfalse
                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                              98. Patient.extension:nz-residency
                              Slice Namenz-residency
                              Definition

                              NZ Residency status

                              ShortExtension
                              Control0..1
                              This element is affected by the following invariants: ele-1
                              TypeExtension(NZResidency) (Complex Extension)
                              Is Modifierfalse
                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                              100. Patient.extension:interpreter-required
                              Slice Nameinterpreter-required
                              Definition

                              Indicates whether an interpreter is required to facilitate communication in a healthcare setting. While this extension is named patient-interpreterRequired for backwards compatibility, it may also be used on RelatedPerson, Practitioner, and Encounter.

                              ShortWhether an interpreter is required
                              Comments

                              The individual does not speak the default language of the organization, and hence requires an interpreter. If other languages are in the Communications list, then that would be the type of interpreter required.

                              While this extension is named patient-interpreterRequired for backwards compatibility, it may also be used on RelatedPerson, Practitioner, and Encounter.

                              When used on Patient, RelatedPerson, or Practitioner, it indicates a default or assumed need for an interpreter. When used on Encounter, it indicates that an interpreter is needed to facilitate communication between some participants in that Encounter. The encounter-level evaluation of whether an interpreter is needed might involve evaluating the language proficiencies of the participants.

                              Control0..1
                              TypeExtension(Interpreter Required) (Extension Type: boolean)
                              Is Modifierfalse
                              Summaryfalse
                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                              102. Patient.modifierExtension
                              Definition

                              May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                              Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                              ShortExtensions that cannot be ignored
                              Comments

                              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                              Control0..*
                              TypeExtension
                              Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
                              Summaryfalse
                              Requirements

                              Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                              Alternate Namesextensions, user content
                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                              104. Patient.identifier
                              Definition

                              An identifier for this patient.

                              ShortAn identifier for this patient
                              NoteThis is a business identifier, not a resource identifier (see discussion)
                              Control0..*
                              TypeIdentifier
                              Is Modifierfalse
                              Summarytrue
                              Requirements

                              Patients are almost always assigned specific numerical identifiers.

                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              SlicingThis element introduces a set of slices on Patient.identifier. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                              • value @ system
                              • 106. Patient.identifier:NHI
                                Slice NameNHI
                                Definition

                                An identifier for this patient.

                                ShortAn identifier for this patient
                                NoteThis is a business identifier, not a resource identifier (see discussion)
                                Control0..*
                                TypeIdentifier
                                Is Modifierfalse
                                Summarytrue
                                Requirements

                                Patients are almost always assigned specific numerical identifiers.

                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                108. Patient.identifier:NHI.id
                                Definition

                                Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                ShortUnique id for inter-element referencing
                                Control0..1
                                Typestring
                                Is Modifierfalse
                                XML FormatIn the XML format, this property is represented as an attribute.
                                Summaryfalse
                                110. Patient.identifier:NHI.extension
                                Definition

                                May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                ShortAdditional content defined by implementations
                                Comments

                                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                Control0..*
                                TypeExtension
                                Is Modifierfalse
                                Summaryfalse
                                Alternate Namesextensions, user content
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                SlicingThis element introduces a set of slices on Patient.identifier.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                                • value @ url
                                • 112. Patient.identifier:NHI.use
                                  Definition

                                  The purpose of this identifier.

                                  Shortusual | official | temp | secondary | old (If known)
                                  Comments

                                  Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.

                                  Control0..1
                                  BindingThe codes SHALL be taken from Valid use values for NHI
                                  (required to https://nzhts.digital.health.nz/fhir/ValueSet/nhi-use-code)
                                  Typecode
                                  Is Modifiertrue because This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one.
                                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                  Summarytrue
                                  Requirements

                                  Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.

                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                  114. Patient.identifier:NHI.type
                                  Definition

                                  A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.

                                  ShortDescription of identifier
                                  Comments

                                  This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.

                                  Control0..1
                                  BindingUnless not suitable, these codes SHALL be taken from Identifier Type Codes
                                  (extensible to http://hl7.org/fhir/ValueSet/identifier-type)

                                  A coded type for an identifier that can be used to determine which identifier to use for a specific purpose.

                                  TypeCodeableConcept
                                  Is Modifierfalse
                                  Summarytrue
                                  Requirements

                                  Allows users to make use of identifiers when the identifier system is not known.

                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                  116. Patient.identifier:NHI.system
                                  Definition

                                  Establishes the namespace for the value - that is, a URL that describes a set values that are unique.

                                  ShortThe namespace for the identifier value
                                  Comments

                                  Identifier.system is always case sensitive.

                                  Control1..1
                                  Typeuri
                                  Is Modifierfalse
                                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                  Summarytrue
                                  Requirements

                                  There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.

                                  Fixed Valuehttps://standards.digital.health.nz/ns/nhi-id
                                  ExampleGeneral: http://www.acme.com/identifiers/patient
                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                  118. Patient.identifier:NHI.value
                                  Definition

                                  The portion of the identifier typically relevant to the user and which is unique within the context of the system.

                                  ShortThe value that is unique
                                  Comments

                                  If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe.

                                  Control0..1
                                  Typestring
                                  Is Modifierfalse
                                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                  Summarytrue
                                  ExampleGeneral: 123456
                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                  120. Patient.identifier:NHI.period
                                  Definition

                                  Time period during which identifier is/was valid for use.

                                  ShortTime period when id is/was valid for use
                                  Control0..1
                                  TypePeriod
                                  Is Modifierfalse
                                  Summarytrue
                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                  122. Patient.identifier:NHI.assigner
                                  Definition

                                  Organization that issued/manages the identifier.

                                  ShortOrganization that issued id (may be just text)
                                  Comments

                                  The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization.

                                  Control0..1
                                  TypeReference(Organization)
                                  Is Modifierfalse
                                  Summarytrue
                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                  124. Patient.active
                                  Definition

                                  Whether this patient record is in active use. Many systems use this property to mark as non-current patients, such as those that have not been seen for a period of time based on an organization's business rules.

                                  It is often used to filter patient lists to exclude inactive patients

                                  Deceased patients may also be marked as inactive for the same reasons, but may be active for some time after death.

                                  ShortWhether this patient's record is in active use
                                  Comments

                                  If a record is inactive, and linked to an active record, then future patient/record updates should occur on the other patient.

                                  Control0..1
                                  Typeboolean
                                  Is Modifiertrue because This element is labelled as a modifier because it is a status element that can indicate that a record should not be treated as valid
                                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                  Summarytrue
                                  Requirements

                                  Need to be able to mark a patient record as not to be used because it was created in error.

                                  Meaning if MissingThis resource is generally assumed to be active if no value is provided for the active element
                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                  126. Patient.name
                                  Definition

                                  A name associated with the individual.

                                  ShortA name associated with the patient
                                  Comments

                                  A patient may have multiple names with different uses or applicable periods. For animals, the name is a "HumanName" in the sense that is assigned and used by humans and has the same patterns.

                                  Control0..0
                                  TypeHumanName
                                  Is Modifierfalse
                                  Summarytrue
                                  Requirements

                                  Need to be able to track the patient by multiple names. Examples are your official name and a partner name.

                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                  138. Patient.telecom
                                  Definition

                                  Details for all kinds of technology mediated contact points for a person or organization, including telephone, email, etc.

                                  ShortDetails of a Technology mediated contact point (phone, fax, email, etc.)
                                  Comments

                                  A Patient may have multiple ways to be contacted with different uses or applicable periods. May need to have options for contacting the person urgently and also to help with identification. The address might not go directly to the individual, but may reach another party that is able to proxy for the patient (i.e. home phone, or pet owner's phone).

                                  Control1..*
                                  This element is affected by the following invariants: ele-1
                                  TypeContactPoint(Common NZ ContactPoint datatype)
                                  Is Modifierfalse
                                  Must Supporttrue
                                  Requirements

                                  People have (primary) ways to contact them in some way such as phone, email.

                                  Invariantscpt-2: A system is required if a value is provided. (value.empty() or system.exists())
                                  ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                  dho-telecom-notification-valid-system: The notification-enabled extension should only be present when the telecom system is 'email', 'sms', or 'phone' with use 'mobile'. (extension.where(url = 'https://fhir-ig.digital.health.nz/shared-care/StructureDefinition/dho-telecom-notification').exists() implies (system = 'email' or system = 'sms' or (system = 'phone' and use = 'mobile')))
                                  140. Patient.telecom.id
                                  Definition

                                  Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                  ShortUnique id for inter-element referencing
                                  Control0..0
                                  Typestring
                                  Is Modifierfalse
                                  XML FormatIn the XML format, this property is represented as an attribute.
                                  Summaryfalse
                                  142. Patient.telecom.extension
                                  Definition

                                  May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                  ShortAdditional content defined by implementations
                                  Comments

                                  There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                  Control0..*
                                  TypeExtension
                                  Is Modifierfalse
                                  Summaryfalse
                                  Alternate Namesextensions, user content
                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                  ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                  SlicingThis element introduces a set of slices on Patient.telecom.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                                  • value @ url
                                  • 144. Patient.telecom.extension:cp-purpose
                                    Slice Namecp-purpose
                                    Definition

                                    A specific purpose for which this ContactPoint dataType would be used. An example would be to indicate that this ContactPoint is used for video conferencing.

                                    ShortA specific purpose for which this ContactPoint dataType would be used
                                    Control0..0
                                    TypeExtension(A specific purpose for which this ContactPoint dataType would be used) (Extension Type: CodeableConcept)
                                    Is Modifierfalse
                                    Summaryfalse
                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                    146. Patient.telecom.extension:notification-enabled
                                    Slice Namenotification-enabled
                                    Definition

                                    Indicates whether notifications can be sent to this telecom point. Used when the system type is 'email', 'sms', or 'phone' with use 'mobile'.

                                    ShortTrue if notifications can be sent to this email or SMS address
                                    Control0..1
                                    TypeExtension(DHO Telecom Notification Enabled) (Extension Type: boolean)
                                    Is Modifierfalse
                                    Must Supporttrue
                                    Summaryfalse
                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                    148. Patient.telecom.system
                                    Definition

                                    Telecommunications form for contact point - what communications system is required to make use of the contact.

                                    Shortphone | fax | email | pager | url | sms | other
                                    Control1..1
                                    This element is affected by the following invariants: cpt-2
                                    BindingThe codes SHALL be taken from ContactPointSystem
                                    (required to http://hl7.org/fhir/ValueSet/contact-point-system|4.0.1)

                                    Telecommunications form for contact point.

                                    Typecode
                                    Is Modifierfalse
                                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                    Must Supporttrue
                                    Summarytrue
                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                    150. Patient.telecom.value
                                    Definition

                                    The actual contact point details, in a form that is meaningful to the designated communication system (i.e. phone number or email address).

                                    ShortThe actual contact point details
                                    Comments

                                    Additional text data such as phone extension numbers, or notes about use of the contact are sometimes included in the value.

                                    Control1..1
                                    Typestring
                                    Is Modifierfalse
                                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                    Must Supporttrue
                                    Summarytrue
                                    Requirements

                                    Need to support legacy numbers that are not in a tightly controlled format.

                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                    152. Patient.telecom.use
                                    Definition

                                    The purpose of this contact point - constrained to home | work | mobile

                                    Shorthome | work | mobile
                                    Comments

                                    Applications can assume that a contact is current unless it explicitly says that it is temporary or old.

                                    Control1..1
                                    BindingThe codes SHALL be taken from ContactPointUse
                                    (required to http://hl7.org/fhir/ValueSet/contact-point-use|4.0.1)

                                    Use of contact point.

                                    Typecode
                                    Is Modifiertrue because This is labeled as "Is Modifier" because applications should not mistake a temporary or old contact etc.for a current/permanent one
                                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                    Must Supporttrue
                                    Summarytrue
                                    Requirements

                                    Need to track the way a person uses this contact, so a user can choose which is appropriate for their purpose.

                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                    154. Patient.telecom.rank
                                    Definition

                                    Specifies a preferred order in which to use a set of contacts. ContactPoints with lower rank values are more preferred than those with higher rank values.

                                    ShortSpecify preferred order of use (1 = highest)
                                    Comments

                                    Note that rank does not necessarily follow the order in which the contacts are represented in the instance.

                                    Control0..1
                                    TypepositiveInt
                                    Is Modifierfalse
                                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                    Summarytrue
                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                    156. Patient.telecom.period
                                    Definition

                                    Time period when the contact point was/is in use.

                                    ShortTime period when the contact point was/is in use
                                    Control0..0
                                    TypePeriod
                                    Is Modifierfalse
                                    Summarytrue
                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                    158. Patient.gender
                                    Definition

                                    Administrative Gender - the gender that the patient is considered to have for administration and record keeping purposes.

                                    Shortmale | female | other | unknown
                                    Comments

                                    The gender might not match the biological sex as determined by genetics or the individual's preferred identification. Note that for both humans and particularly animals, there are other legitimate possibilities than male and female, though the vast majority of systems and contexts only support male and female. Systems providing decision support or enforcing business rules should ideally do this on the basis of Observations dealing with the specific sex or gender aspect of interest (anatomical, chromosomal, social, etc.) However, because these observations are infrequently recorded, defaulting to the administrative gender is common practice. Where such defaulting occurs, rule enforcement should allow for the variation between administrative and biological, chromosomal and other gender aspects. For example, an alert about a hysterectomy on a male should be handled as a warning or overridable error, not a "hard" error. See the Patient Gender and Sex section for additional information about communicating patient gender and sex.

                                    Control0..1
                                    BindingThe codes SHALL be taken from AdministrativeGender
                                    (required to http://hl7.org/fhir/ValueSet/administrative-gender|4.0.1)

                                    The gender of a person used for administrative purposes.

                                    Typecode
                                    Is Modifierfalse
                                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                    Summarytrue
                                    Requirements

                                    Needed for identification of the individual, in combination with (at least) name and birth date.

                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                    160. Patient.gender.id
                                    Definition

                                    unique id for the element within a resource (for internal references)

                                    Shortxml:id (or equivalent in JSON)
                                    Control0..1
                                    Typestring
                                    Is Modifierfalse
                                    XML FormatIn the XML format, this property is represented as an attribute.
                                    Summaryfalse
                                    162. Patient.gender.extension
                                    Definition

                                    An Extension

                                    ShortExtension
                                    Control0..*
                                    TypeExtension
                                    Is Modifierfalse
                                    Summaryfalse
                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                    SlicingThis element introduces a set of slices on Patient.gender.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                                    • value @ url
                                    • 164. Patient.gender.extension:genderOriginalText
                                      Slice NamegenderOriginalText
                                      Definition

                                      Text provided by the person with the choice of 'Another gender' (The FHIR AdministrativeGender CodeSystem codes this as 'other').

                                      ShortExtension
                                      Control0..1
                                      This element is affected by the following invariants: ele-1
                                      TypeExtension(GenderOriginalText) (Extension Type: string)
                                      Is Modifierfalse
                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                      166. Patient.gender.value
                                      Definition

                                      Primitive value for code

                                      ShortPrimitive value for code
                                      Control0..1
                                      Typestring
                                      Is Modifierfalse
                                      XML FormatIn the XML format, this property is represented as an attribute.
                                      Summaryfalse
                                      168. Patient.birthDate
                                      Definition

                                      The date of birth for the individual.

                                      ShortThe date of birth for the individual
                                      Comments

                                      At least an estimated year should be provided as a guess if the real DOB is unknown There is a standard extension "patient-birthTime" available that should be used where Time is required (such as in maternity/infant care systems).

                                      Control0..0
                                      Typedate
                                      Is Modifierfalse
                                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                      Summarytrue
                                      Requirements

                                      Age of the individual drives many clinical processes.

                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                      LOINC Code21112-8
                                      174. Patient.deceased[x]
                                      Definition

                                      Indicates if the individual is deceased or not.

                                      ShortIndicates if the individual is deceased or not
                                      Comments

                                      If there's no value in the instance, it means there is no statement on whether or not the individual is deceased. Most systems will interpret the absence of a value as a sign of the person being alive.

                                      Control0..1
                                      TypedateTime
                                      [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                      Is Modifiertrue because This element is labeled as a modifier because once a patient is marked as deceased, the actions that are appropriate to perform on the patient may be significantly different.
                                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                      Summarytrue
                                      Requirements

                                      The fact that a patient is deceased influences the clinical process. Also, in human communication and relation management it is necessary to know whether the person is alive.

                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                      SlicingThis element introduces a set of slices on Patient.deceased[x]. The slices areUnordered and Closed, and can be differentiated using the following discriminators:
                                      • type @ $this
                                      • 176. Patient.deceased[x]:deceasedBoolean
                                        Slice NamedeceasedBoolean
                                        Definition

                                        Indicates if the individual is deceased or not.

                                        ShortIndicates if the individual is deceased or not
                                        Comments

                                        If there's no value in the instance, it means there is no statement on whether or not the individual is deceased. Most systems will interpret the absence of a value as a sign of the person being alive.

                                        Control0..0
                                        Typeboolean
                                        Is Modifiertrue because This element is labeled as a modifier because once a patient is marked as deceased, the actions that are appropriate to perform on the patient may be significantly different.
                                        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                        Summarytrue
                                        Requirements

                                        The fact that a patient is deceased influences the clinical process. Also, in human communication and relation management it is necessary to know whether the person is alive.

                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                        178. Patient.deceased[x]:deceasedDateTime
                                        Slice NamedeceasedDateTime
                                        Definition

                                        Indicates if the individual is deceased or not.

                                        ShortIndicates if the individual is deceased or not
                                        Comments

                                        If there's no value in the instance, it means there is no statement on whether or not the individual is deceased. Most systems will interpret the absence of a value as a sign of the person being alive.

                                        Control0..1
                                        TypedateTime
                                        [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                        Is Modifiertrue because This element is labeled as a modifier because once a patient is marked as deceased, the actions that are appropriate to perform on the patient may be significantly different.
                                        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                        Summarytrue
                                        Requirements

                                        The fact that a patient is deceased influences the clinical process. Also, in human communication and relation management it is necessary to know whether the person is alive.

                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                        180. Patient.deceased[x]:deceasedDateTime.id
                                        Definition

                                        unique id for the element within a resource (for internal references)

                                        Shortxml:id (or equivalent in JSON)
                                        Control0..1
                                        Typestring
                                        Is Modifierfalse
                                        XML FormatIn the XML format, this property is represented as an attribute.
                                        Summaryfalse
                                        182. Patient.deceased[x]:deceasedDateTime.extension
                                        Definition

                                        An Extension

                                        ShortExtension
                                        Control0..*
                                        TypeExtension
                                        Is Modifierfalse
                                        Summaryfalse
                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                        SlicingThis element introduces a set of slices on Patient.deceased[x].extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                                        • value @ url
                                        • 184. Patient.deceased[x]:deceasedDateTime.extension:information-source
                                          Slice Nameinformation-source
                                          Definition

                                          The official source of information held about a patient.

                                          ShortInformation Source
                                          Control0..1
                                          This element is affected by the following invariants: ele-1
                                          TypeExtension(Information Source) (Extension Type: CodeableConcept)
                                          Is Modifierfalse
                                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                          186. Patient.deceased[x]:deceasedDateTime.value
                                          Definition

                                          The actual value

                                          ShortPrimitive value for dateTime
                                          Control0..1
                                          TypedateTime
                                          Is Modifierfalse
                                          XML FormatIn the XML format, this property is represented as an attribute.
                                          Summaryfalse
                                          188. Patient.address
                                          Definition

                                          An address expressed using postal conventions (as opposed to GPS or other location definition formats). This data type may be used to convey addresses for use in delivering mail as well as for visiting locations which might not be valid for mail delivery. There are a variety of postal address formats defined around the world.

                                          ShortAn address expressed using postal conventions (as opposed to GPS or other location definition formats)
                                          Comments

                                          Note: address is intended to describe postal addresses for administrative purposes, not to describe absolute geographical coordinates. Postal addresses are often used as proxies for physical locations (also see the Location resource).

                                          Control0..0
                                          This element is affected by the following invariants: ele-1
                                          TypeAddress(Common NZ Address datatype)
                                          Is Modifierfalse
                                          Requirements

                                          May need to keep track of patient addresses for contacting, billing or reporting requirements and also to help with identification.

                                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                          190. Patient.maritalStatus
                                          Definition

                                          This field contains a patient's most recent marital (civil) status.

                                          ShortMarital (civil) status of a patient
                                          Control0..0
                                          BindingUnless not suitable, these codes SHALL be taken from Marital Status Codes
                                          (extensible to http://hl7.org/fhir/ValueSet/marital-status)

                                          The domestic partnership status of a person.

                                          TypeCodeableConcept
                                          Is Modifierfalse
                                          Summaryfalse
                                          Requirements

                                          Most, if not all systems capture it.

                                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                          192. Patient.multipleBirth[x]
                                          Definition

                                          Indicates whether the patient is part of a multiple (boolean) or indicates the actual birth order (integer).

                                          ShortWhether patient is part of a multiple birth
                                          Comments

                                          Where the valueInteger is provided, the number is the birth number in the sequence. E.g. The middle birth in triplets would be valueInteger=2 and the third born would have valueInteger=3 If a boolean value was provided for this triplets example, then all 3 patient records would have valueBoolean=true (the ordering is not indicated).

                                          Control0..1
                                          Typeinteger
                                          [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                          Is Modifierfalse
                                          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                          Summaryfalse
                                          Requirements

                                          For disambiguation of multiple-birth children, especially relevant where the care provider doesn't meet the patient, such as labs.

                                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                          SlicingThis element introduces a set of slices on Patient.multipleBirth[x]. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                                          • type @ $this
                                          • 194. Patient.multipleBirth[x]:multipleBirthBoolean
                                            Slice NamemultipleBirthBoolean
                                            Definition

                                            Indicates whether the patient is part of a multiple (boolean) or indicates the actual birth order (integer).

                                            ShortWhether patient is part of a multiple birth
                                            Comments

                                            Where the valueInteger is provided, the number is the birth number in the sequence. E.g. The middle birth in triplets would be valueInteger=2 and the third born would have valueInteger=3 If a boolean value was provided for this triplets example, then all 3 patient records would have valueBoolean=true (the ordering is not indicated).

                                            Control0..0
                                            Typeboolean
                                            Is Modifierfalse
                                            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                            Summaryfalse
                                            Requirements

                                            For disambiguation of multiple-birth children, especially relevant where the care provider doesn't meet the patient, such as labs.

                                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                            196. Patient.photo
                                            Definition

                                            Image of the patient.

                                            ShortImage of the patient
                                            Comments

                                            Guidelines:

                                            • Use id photos, not clinical photos.
                                            • Limit dimensions to thumbnail.
                                            • Keep byte count low to ease resource updates.
                                            Control0..0
                                            TypeAttachment
                                            Is Modifierfalse
                                            Summaryfalse
                                            Requirements

                                            Many EHR systems have the capability to capture an image of the patient. Fits with newer social media usage too.

                                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                            198. Patient.contact
                                            Definition

                                            A contact party (e.g. guardian, partner, friend) for the patient.

                                            ShortA contact party (e.g. guardian, partner, friend) for the patient
                                            Comments

                                            Contact covers all kinds of contact parties: family members, business contacts, guardians, caregivers. Not applicable to register pedigree and family ties beyond use of having contact.

                                            Control0..0
                                            TypeBackboneElement
                                            Is Modifierfalse
                                            Summaryfalse
                                            Requirements

                                            Need to track people you can contact about the patient.

                                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                            pat-1: SHALL at least contain a contact's details or a reference to an organization (name.exists() or telecom.exists() or address.exists() or organization.exists())
                                            210. Patient.communication
                                            Definition

                                            A language which may be used to communicate with the patient about his or her health.

                                            ShortA language which may be used to communicate with the patient about his or her health
                                            Comments

                                            If no language is specified, this implies that the default local language is spoken. If you need to convey proficiency for multiple modes, then you need multiple Patient.Communication associations. For animals, language is not a relevant field, and should be absent from the instance. If the Patient does not speak the default local language, then the Interpreter Required Standard can be used to explicitly declare that an interpreter is required.

                                            Control0..0
                                            TypeBackboneElement
                                            Is Modifierfalse
                                            Summaryfalse
                                            Requirements

                                            If a patient does not speak the local language, interpreters may be required, so languages spoken and proficiency are important things to keep track of both for patient and other persons of interest.

                                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                            217. Patient.generalPractitioner
                                            Definition

                                            Patient's nominated care provider.

                                            ShortPatient's nominated primary care provider
                                            Comments

                                            This may be the primary care provider (in a GP context), or it may be a patient nominated care manager in a community/disability setting, or even organization that will provide people to perform the care provider roles. It is not to be used to record Care Teams, these should be in a CareTeam resource that may be linked to the CarePlan or EpisodeOfCare resources. Multiple GPs may be recorded against the patient for various reasons, such as a student that has his home GP listed along with the GP at university during the school semesters, or a "fly-in/fly-out" worker that has the onsite GP also included with his home GP to remain aware of medical issues.

                                            Jurisdictions may decide that they can profile this down to 1 if desired, or 1 per type.

                                            Control0..0
                                            TypeReference(Organization, Practitioner, PractitionerRole)
                                            Is Modifierfalse
                                            Summaryfalse
                                            Alternate NamescareProvider
                                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                            219. Patient.managingOrganization
                                            Definition

                                            Organization that is the custodian of the patient record.

                                            ShortOrganization that is the custodian of the patient record
                                            Comments

                                            There is only one managing organization for a specific patient record. Other organizations will have their own Patient record, and may use the Link property to join the records together (or a Person resource which can include confidence ratings for the association).

                                            Control0..0
                                            TypeReference(Organization)
                                            Is Modifierfalse
                                            Summarytrue
                                            Requirements

                                            Need to know who recognizes this patient record, manages and updates it.

                                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                            221. Patient.link
                                            Definition

                                            Link to another patient resource that concerns the same actual patient.

                                            ShortLink to another patient resource that concerns the same actual person
                                            Comments

                                            There is no assumption that linked patient records have mutual links.

                                            Control0..0
                                            TypeBackboneElement
                                            Is Modifiertrue because This element is labeled as a modifier because it might not be the main Patient resource, and the referenced patient should be used instead of this Patient record. This is when the link.type value is 'replaced-by'
                                            Summarytrue
                                            Requirements

                                            There are multiple use cases:

                                            • Duplicate patient records due to the clerical errors associated with the difficulties of identifying humans consistently, and
                                            • Distribution of patient information across multiple servers.
                                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))