FHIR New Zealand Patient Summary IG
0.5.0 - ci-build New Zealand flag

FHIR New Zealand Patient Summary IG - Local Development build (v0.5.0) built by the FHIR (HL7® FHIR® Standard) Build Tools. See the Directory of published versions

Resource Profile: NZPSPatient - Detailed Descriptions

Draft as of 2024-08-01

Definitions for the nzps-patient resource profile.

Guidance on how to interpret the contents of this table can be found here

0. Patient
Impose ProfileThis profile also requires that the instance also conform this additional profile:
Invariantsnz-pat-1: A patient can only have a one official (i.e. 'live') NHI (Patient.identifier.where(system='https://standards.digital.health.nz/ns/nhi-id' and use='official').count() < 2)
2. Patient.extension
SlicingThis element introduces a set of slices on Patient.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
  • value @ url
  • 4. Patient.extension:ethnicity
    Slice Nameethnicity
    Control0..6
    TypeExtension(NZ Ethnicity) (Extension Type: CodeableConcept)
    6. Patient.extension:maori-descent
    Slice Namemaori-descent
    Control0..1
    TypeExtension(MaoriDescent) (Extension Type: CodeableConcept)
    8. Patient.extension:iwi
    Slice Nameiwi
    Control0..*
    TypeExtension(Nz_iwi) (Extension Type: CodeableConcept)
    10. Patient.extension:birth-country
    Slice Namebirth-country
    Control0..1
    TypeExtension(Patient Birth Place) (Extension Type: Address)
    12. Patient.identifier
    NoteThis is a business identifier, not a resource identifier (see discussion)
    SlicingThis element introduces a set of slices on Patient.identifier. The slices areUnordered and Open, and can be differentiated using the following discriminators:
    • value @ system
    • 14. Patient.identifier:NHI
      Slice NameNHI
      Definition

      The NHI number is a unique number for all New Zealanders, assigned at birth

      ShortThe currently active NHI
      NoteThis is a business identifier, not a resource identifier (see discussion)
      Control0..1
      Must Supporttrue
      16. Patient.identifier:NHI.use
      Shortfixed to official
      Fixed Valueoffical
      18. Patient.identifier:NHI.system
      Control1..?
      Fixed Valuehttps://standards.digital.health.nz/ns/nhi-id
      20. Patient.identifier:dormant
      Slice Namedormant
      Definition

      An NHI of the person that is no longer in use. An NHI becomes dormant when it is discovered that 2 NHIs exist for the same person. The NHIs are linked, one becomes ‘live’ the other ‘dormant’.

      ShortNHI identifiers that have been deprecated for this Person
      NoteThis is a business identifier, not a resource identifier (see discussion)
      Control0..*
      Must Supporttrue
      22. Patient.identifier:dormant.use
      Shortfixed to old
      Fixed Valueold
      24. Patient.identifier:dormant.system
      Control1..?
      Fixed Valuehttps://standards.digital.health.nz/ns/nhi-id
      26. Patient.telecom
      TypeContactPoint(Common NZ ContactPoint datatype)
      28. Patient.gender
      30. Patient.gender.extension
      SlicingThis element introduces a set of slices on Patient.gender.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
      • value @ url
      • 32. Patient.gender.extension:originalText
        Slice NameoriginalText
        Control0..1
        TypeExtension(GenderOriginalText) (Extension Type: string)
        34. Patient.address
        TypeAddress(Common NZ Address datatype)

        Guidance on how to interpret the contents of this table can be found here

        0. Patient
        Definition

        Demographics and other administrative information about an individual or animal receiving care or other health-related services.

        ShortInformation about an individual or animal receiving health care services
        Control0..*
        Is Modifierfalse
        Impose ProfileThis profile also requires that the instance also conform this additional profile:
        Summaryfalse
        Alternate NamesSubjectOfCare Client Resident
        Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
        dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
        dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
        dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
        dom-6: A resource should have narrative for robust management (text.`div`.exists())
        nz-pat-1: A patient can only have a one official (i.e. 'live') NHI (Patient.identifier.where(system='https://standards.digital.health.nz/ns/nhi-id' and use='official').count() < 2)
        2. Patient.implicitRules
        Definition

        A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

        ShortA set of rules under which this content was created
        Comments

        Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

        Control0..1
        Typeuri
        Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        4. Patient.extension
        Definition

        An Extension


        May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortExtensionAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        SlicingThis element introduces a set of slices on Patient.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
        • value @ url
        • 6. Patient.extension:ethnicity
          Slice Nameethnicity
          Definition

          The ethnic group or groups that a person identifies with or feels they belong to. Ethnicity is a measure of cultural affiliation as opposed to race, ancestry, nationality or citizen. Ethnicity is self-perceived and a person can belong to more than one group.

          The Stats New Zealand standard can be found here.

          ShortNZ Ethnicity
          Control0..6
          This element is affected by the following invariants: ele-1
          TypeExtension(NZ Ethnicity) (Extension Type: CodeableConcept)
          Is Modifierfalse
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          8. Patient.extension:maori-descent
          Slice Namemaori-descent
          Definition

          Code indicating whether the person is of Māori descent

          ShortExtension
          Control0..1
          This element is affected by the following invariants: ele-1
          TypeExtension(MaoriDescent) (Extension Type: CodeableConcept)
          Is Modifierfalse
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          10. Patient.extension:iwi
          Slice Nameiwi
          Definition

          Persons Iwi affiliation

          ShortExtension
          Control0..*
          This element is affected by the following invariants: ele-1
          TypeExtension(Nz_iwi) (Extension Type: CodeableConcept)
          Is Modifierfalse
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          12. Patient.extension:birth-country
          Slice Namebirth-country
          Definition

          The registered place of birth of the patient. A sytem may use the address.text if they don't store the birthPlace address in discrete elements.

          ShortPlace of Birth for patient
          Control0..1
          TypeExtension(Patient Birth Place) (Extension Type: Address)
          Is Modifierfalse
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          14. Patient.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
          Summaryfalse
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          16. Patient.identifier
          Definition

          An identifier for this patient.

          ShortAn identifier for this patient
          NoteThis is a business identifier, not a resource identifier (see discussion)
          Control0..*
          TypeIdentifier
          Is Modifierfalse
          Must Supporttrue
          Summarytrue
          Requirements

          Patients are almost always assigned specific numerical identifiers.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          SlicingThis element introduces a set of slices on Patient.identifier. The slices areUnordered and Open, and can be differentiated using the following discriminators:
          • value @ system
          • 18. Patient.identifier:NHI
            Slice NameNHI
            Definition

            The NHI number is a unique number for all New Zealanders, assigned at birth


            An identifier for this patient.

            ShortThe currently active NHI An identifier for this patient
            NoteThis is a business identifier, not a resource identifier (see discussion)
            Control0..1*
            TypeIdentifier
            Is Modifierfalse
            Must Supporttrue
            Summarytrue
            Requirements

            Patients are almost always assigned specific numerical identifiers.

            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            20. Patient.identifier:NHI.use
            Definition

            The purpose of this identifier.

            Shortfixed to officialusual | official | temp | secondary | old (If known)
            Comments

            Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.

            Control0..1
            BindingThe codes SHALL be taken from IdentifierUsehttp://hl7.org/fhir/ValueSet/identifier-use|4.0.1
            (required to http://hl7.org/fhir/ValueSet/identifier-use|4.0.1)

            Identifies the purpose for this identifier, if known .

            Typecode
            Is Modifiertrue because This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one.
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Summarytrue
            Requirements

            Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.

            Fixed Valueoffical
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            22. Patient.identifier:NHI.system
            Definition

            Establishes the namespace for the value - that is, a URL that describes a set values that are unique.

            ShortThe namespace for the identifier value
            Comments

            Identifier.system is always case sensitive.

            Control10..1
            Typeuri
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Summarytrue
            Requirements

            There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.

            Fixed Valuehttps://standards.digital.health.nz/ns/nhi-id
            Example<br/><b>General</b>:http://www.acme.com/identifiers/patient
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            24. Patient.identifier:dormant
            Slice Namedormant
            Definition

            An NHI of the person that is no longer in use. An NHI becomes dormant when it is discovered that 2 NHIs exist for the same person. The NHIs are linked, one becomes ‘live’ the other ‘dormant’.


            An identifier for this patient.

            ShortNHI identifiers that have been deprecated for this PersonAn identifier for this patient
            NoteThis is a business identifier, not a resource identifier (see discussion)
            Control0..*
            TypeIdentifier
            Is Modifierfalse
            Must Supporttrue
            Summarytrue
            Requirements

            Patients are almost always assigned specific numerical identifiers.

            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            26. Patient.identifier:dormant.use
            Definition

            The purpose of this identifier.

            Shortfixed to oldusual | official | temp | secondary | old (If known)
            Comments

            Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.

            Control0..1
            BindingThe codes SHALL be taken from IdentifierUsehttp://hl7.org/fhir/ValueSet/identifier-use|4.0.1
            (required to http://hl7.org/fhir/ValueSet/identifier-use|4.0.1)

            Identifies the purpose for this identifier, if known .

            Typecode
            Is Modifiertrue because This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one.
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Summarytrue
            Requirements

            Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.

            Fixed Valueold
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            28. Patient.identifier:dormant.system
            Definition

            Establishes the namespace for the value - that is, a URL that describes a set values that are unique.

            ShortThe namespace for the identifier value
            Comments

            Identifier.system is always case sensitive.

            Control10..1
            Typeuri
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Summarytrue
            Requirements

            There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.

            Fixed Valuehttps://standards.digital.health.nz/ns/nhi-id
            Example<br/><b>General</b>:http://www.acme.com/identifiers/patient
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            30. Patient.active
            Definition

            Whether this patient record is in active use. Many systems use this property to mark as non-current patients, such as those that have not been seen for a period of time based on an organization's business rules.

            It is often used to filter patient lists to exclude inactive patients

            Deceased patients may also be marked as inactive for the same reasons, but may be active for some time after death.

            ShortWhether this patient's record is in active use
            Comments

            If a record is inactive, and linked to an active record, then future patient/record updates should occur on the other patient.

            Control0..1
            Typeboolean
            Is Modifiertrue because This element is labelled as a modifier because it is a status element that can indicate that a record should not be treated as valid
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Summarytrue
            Requirements

            Need to be able to mark a patient record as not to be used because it was created in error.

            Meaning if MissingThis resource is generally assumed to be active if no value is provided for the active element
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            32. Patient.name
            Definition

            A name associated with the individual.

            ShortA name associated with the patient
            Comments

            A patient may have multiple names with different uses or applicable periods. For animals, the name is a "HumanName" in the sense that is assigned and used by humans and has the same patterns.

            Control10..*
            TypeHumanName
            Is Modifierfalse
            Must Supporttrue
            Summarytrue
            Requirements

            Need to be able to track the patient by multiple names. Examples are your official name and a partner name. The Alphabetic representation of the name SHALL be always provided


            Need to be able to track the patient by multiple names. Examples are your official name and a partner name.

            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            ips-pat-1: Patient.name.given, Patient.name.family or Patient.name.text SHALL be present (family.exists() or given.exists() or text.exists())
            34. Patient.name.use
            Definition

            Identifies the purpose for this name.

            Shortusual | official | temp | nickname | anonymous | old | maiden
            Comments

            Applications can assume that a name is current unless it explicitly says that it is temporary or old.

            Control0..1
            BindingThe codes SHALL be taken from NameUsehttp://hl7.org/fhir/ValueSet/name-use|4.0.1
            (required to http://hl7.org/fhir/ValueSet/name-use|4.0.1)

            The use of a human name.

            Typecode
            Is Modifiertrue because This is labeled as "Is Modifier" because applications should not mistake a temporary or old name etc.for a current/permanent one
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Summarytrue
            Requirements

            Allows the appropriate name for a particular context of use to be selected from among a set of names.

            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            36. Patient.name.text
            Definition

            Text representation of the full name. Due to the cultural variance around the world a consuming system may not know how to present the name correctly; moreover not all the parts of the name go in given or family. Creators are therefore strongly encouraged to provide through this element a presented version of the name. Future versions of this guide may require this element


            Specifies the entire name as it should be displayed e.g. on an application UI. This may be provided instead of or as well as the specific parts.

            ShortText representation of the full name
            Comments

            Can provide both a text representation and parts. Applications updating a name SHALL ensure that when both text and parts are present, no content is included in the text that isn't found in a part.

            Control0..1
            Typestring
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Must Supporttrue
            Summarytrue
            Requirements

            A renderable, unencoded form.

            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            38. Patient.name.family
            Definition

            The part of a name that links to the genealogy. In some cultures (e.g. Eritrea) the family name of a son is the first name of his father.

            ShortFamily name (often called 'Surname')
            Comments

            Family Name may be decomposed into specific parts using extensions (de, nl, es related cultures).

            Control0..1
            Typestring
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Must Supporttrue
            Summarytrue
            Alternate Namessurname
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            40. Patient.name.given
            Definition

            Given name.

            ShortGiven names (not always 'first'). Includes middle names
            Comments

            If only initials are recorded, they may be used in place of the full name parts. Initials may be separated into multiple given names but often aren't due to paractical limitations. This element is not called "first name" since given names do not always come first.

            Control0..*
            Typestring
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Must Supporttrue
            Summarytrue
            Alternate Namesfirst name, middle name
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            42. Patient.telecom
            Definition

            Details for all kinds of technology mediated contact points for a person or organization, including telephone, email, etc.


            A contact detail (e.g. a telephone number or an email address) by which the individual may be contacted.

            ShortDetails of a Technology mediated contact point (phone, fax, email, etc.)A contact detail for the individual
            Comments

            A Patient may have multiple ways to be contacted with different uses or applicable periods. May need to have options for contacting the person urgently and also to help with identification. The address might not go directly to the individual, but may reach another party that is able to proxy for the patient (i.e. home phone, or pet owner's phone).

            Control0..*
            This element is affected by the following invariants: ele-1
            TypeContactPoint(Common NZ ContactPoint datatype)
            Is Modifierfalse
            Must Supporttrue
            Requirements

            People have (primary) ways to contact them in some way such as phone, email.

            Invariantscpt-2: A system is required if a value is provided. (value.empty() or system.exists())
            ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            44. Patient.gender
            Definition

            Administrative Gender - the gender that the patient is considered to have for administration and record keeping purposes.

            Shortmale | female | other | unknown
            Comments

            The gender might not match the biological sex as determined by genetics or the individual's preferred identification. Note that for both humans and particularly animals, there are other legitimate possibilities than male and female, though the vast majority of systems and contexts only support male and female. Systems providing decision support or enforcing business rules should ideally do this on the basis of Observations dealing with the specific sex or gender aspect of interest (anatomical, chromosomal, social, etc.) However, because these observations are infrequently recorded, defaulting to the administrative gender is common practice. Where such defaulting occurs, rule enforcement should allow for the variation between administrative and biological, chromosomal and other gender aspects. For example, an alert about a hysterectomy on a male should be handled as a warning or overridable error, not a "hard" error. See the Patient Gender and Sex section for additional information about communicating patient gender and sex.

            Control0..1
            BindingThe codes SHALL be taken from AdministrativeGenderhttp://hl7.org/fhir/ValueSet/administrative-gender|4.0.1
            (required to http://hl7.org/fhir/ValueSet/administrative-gender|4.0.1)

            The gender of a person used for administrative purposes.

            Typecode
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Must Supporttrue
            Summarytrue
            Requirements

            Needed for identification of the individual, in combination with (at least) name and birth date.

            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            46. Patient.gender.extension
            Definition

            An Extension


            May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

            ShortExtensionAdditional content defined by implementations
            Comments

            There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

            Control0..*
            TypeExtension
            Is Modifierfalse
            Summaryfalse
            Alternate Namesextensions, user content
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            SlicingThis element introduces a set of slices on Patient.gender.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
            • value @ url
            • 48. Patient.gender.extension:originalText
              Slice NameoriginalText
              Definition

              Text provided by the person with the choice of 'Another gender' (The FHIR AdministrativeGender CodeSystem codes this as 'other').

              ShortExtension
              Control0..1
              This element is affected by the following invariants: ele-1
              TypeExtension(GenderOriginalText) (Extension Type: string)
              Is Modifierfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
              50. Patient.birthDate
              Definition

              The date of birth for the individual.

              ShortThe date of birth for the individual
              Comments

              At least an estimated year should be provided as a guess if the real DOB is unknown There is a standard extension "patient-birthTime" available that should be used where Time is required (such as in maternity/infant care systems).

              Control10..1
              Typedate
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Must Supporttrue
              Summarytrue
              Requirements

              Age of the individual drives many clinical processes.

              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              LOINC Code21112-8
              52. Patient.deceased[x]
              Definition

              Indicates if the individual is deceased or not.

              ShortIndicates if the individual is deceased or not
              Comments

              If there's no value in the instance, it means there is no statement on whether or not the individual is deceased. Most systems will interpret the absence of a value as a sign of the person being alive.

              Control0..1
              TypeChoice of: boolean, dateTime
              [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
              Is Modifiertrue because This element is labeled as a modifier because once a patient is marked as deceased, the actions that are appropriate to perform on the patient may be significantly different.
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Summarytrue
              Requirements

              The fact that a patient is deceased influences the clinical process. Also, in human communication and relation management it is necessary to know whether the person is alive.

              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              54. Patient.address
              Definition

              An address expressed using postal conventions (as opposed to GPS or other location definition formats). This data type may be used to convey addresses for use in delivering mail as well as for visiting locations which might not be valid for mail delivery. There are a variety of postal address formats defined around the world.


              An address for the individual.

              ShortAn address expressed using postal conventions (as opposed to GPS or other location definition formats)An address for the individual
              Comments

              Note: address is intended to describe postal addresses for administrative purposes, not to describe absolute geographical coordinates. Postal addresses are often used as proxies for physical locations (also see the Location resource).


              Patient may have multiple addresses with different uses or applicable periods.

              Control0..*
              This element is affected by the following invariants: ele-1
              TypeAddress(Common NZ Address datatype)
              Is Modifierfalse
              Must Supporttrue
              Requirements

              May need to keep track of patient addresses for contacting, billing or reporting requirements and also to help with identification.

              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              pat-cnt-2or3-char: The content of the country element (if present) SHALL be selected EITHER from ValueSet ISO Country Alpha-2 http://hl7.org/fhir/ValueSet/iso3166-1-2 OR MAY be selected from ISO Country Alpha-3 Value Set http://hl7.org/fhir/ValueSet/iso3166-1-3, IF the country is not specified in value Set ISO Country Alpha-2 http://hl7.org/fhir/ValueSet/iso3166-1-2. (country.empty() or (country.memberOf('http://hl7.org/fhir/ValueSet/iso3166-1-2') or country.memberOf('http://hl7.org/fhir/ValueSet/iso3166-1-3')))
              56. Patient.generalPractitioner
              Definition

              Patient's nominated care provider.

              ShortPatient's nominated primary care provider
              Comments

              This may be the primary care provider (in a GP context), or it may be a patient nominated care manager in a community/disability setting, or even organization that will provide people to perform the care provider roles. It is not to be used to record Care Teams, these should be in a CareTeam resource that may be linked to the CarePlan or EpisodeOfCare resources. Multiple GPs may be recorded against the patient for various reasons, such as a student that has his home GP listed along with the GP at university during the school semesters, or a "fly-in/fly-out" worker that has the onsite GP also included with his home GP to remain aware of medical issues.

              Jurisdictions may decide that they can profile this down to 1 if desired, or 1 per type.

              Control0..*
              TypeReference(Organization, Practitioner, PractitionerRole)
              Is Modifierfalse
              Must Supporttrue
              Must Support TypesNo must-support rules about the choice of types/profiles
              Summaryfalse
              Alternate NamescareProvider
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              58. Patient.link
              Definition

              Link to another patient resource that concerns the same actual patient.

              ShortLink to another patient resource that concerns the same actual person
              Comments

              There is no assumption that linked patient records have mutual links.

              Control0..*
              TypeBackboneElement
              Is Modifiertrue because This element is labeled as a modifier because it might not be the main Patient resource, and the referenced patient should be used instead of this Patient record. This is when the link.type value is 'replaced-by'
              Summarytrue
              Requirements

              There are multiple use cases:

              • Duplicate patient records due to the clerical errors associated with the difficulties of identifying humans consistently, and
              • Distribution of patient information across multiple servers.
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              60. Patient.link.modifierExtension
              Definition

              May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

              Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

              ShortExtensions that cannot be ignored even if unrecognized
              Comments

              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

              Control0..*
              TypeExtension
              Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
              Summarytrue
              Requirements

              Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

              Alternate Namesextensions, user content, modifiers
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
              62. Patient.link.other
              Definition

              The other patient resource that the link refers to.

              ShortThe other patient or related person resource that the link refers to
              Comments

              Referencing a RelatedPerson here removes the need to use a Person record to associate a Patient and RelatedPerson as the same individual.

              Control1..1
              TypeReference(Patient, RelatedPerson)
              Is Modifierfalse
              Summarytrue
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              64. Patient.link.type
              Definition

              The type of link between this patient resource and another patient resource.

              Shortreplaced-by | replaces | refer | seealso
              Control1..1
              BindingThe codes SHALL be taken from LinkTypehttp://hl7.org/fhir/ValueSet/link-type|4.0.1
              (required to http://hl7.org/fhir/ValueSet/link-type|4.0.1)

              The type of link between this patient resource and another patient resource.

              Typecode
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Summarytrue
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

              Guidance on how to interpret the contents of this table can be found here

              0. Patient
              Definition

              Demographics and other administrative information about an individual or animal receiving care or other health-related services.

              ShortInformation about an individual or animal receiving health care services
              Control0..*
              Is Modifierfalse
              Impose ProfileThis profile also requires that the instance also conform this additional profile:
              Summaryfalse
              Alternate NamesSubjectOfCare Client Resident
              Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
              dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
              dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
              dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
              dom-6: A resource should have narrative for robust management (text.`div`.exists())
              nz-pat-1: A patient can only have a one official (i.e. 'live') NHI (Patient.identifier.where(system='https://standards.digital.health.nz/ns/nhi-id' and use='official').count() < 2)
              2. Patient.id
              Definition

              The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

              ShortLogical id of this artifact
              Comments

              The only time that a resource does not have an id is when it is being submitted to the server using a create operation.

              Control0..1
              Typeid
              Is Modifierfalse
              Summarytrue
              4. Patient.meta
              Definition

              The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource.

              ShortMetadata about the resource
              Control0..1
              TypeMeta
              Is Modifierfalse
              Summarytrue
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              6. Patient.implicitRules
              Definition

              A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

              ShortA set of rules under which this content was created
              Comments

              Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

              Control0..1
              Typeuri
              Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Summarytrue
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              8. Patient.language
              Definition

              The base language in which the resource is written.

              ShortLanguage of the resource content
              Comments

              Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

              Control0..1
              BindingThe codes SHOULD be taken from CommonLanguages
              (preferred to http://hl7.org/fhir/ValueSet/languages)

              A human language.

              Additional BindingsPurpose
              AllLanguagesMax Binding
              Typecode
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              10. Patient.text
              Definition

              A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.

              ShortText summary of the resource, for human interpretation
              Comments

              Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later.

              Control0..1
              TypeNarrative
              Is Modifierfalse
              Summaryfalse
              Alternate Namesnarrative, html, xhtml, display
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              12. Patient.contained
              Definition

              These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope.

              ShortContained, inline Resources
              Comments

              This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels.

              Control0..*
              TypeResource
              Is Modifierfalse
              Summaryfalse
              Alternate Namesinline resources, anonymous resources, contained resources
              14. Patient.extension
              Definition

              An Extension

              ShortExtension
              Control0..*
              TypeExtension
              Is Modifierfalse
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
              SlicingThis element introduces a set of slices on Patient.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
              • value @ url
              • 16. Patient.extension:ethnicity
                Slice Nameethnicity
                Definition

                The ethnic group or groups that a person identifies with or feels they belong to. Ethnicity is a measure of cultural affiliation as opposed to race, ancestry, nationality or citizen. Ethnicity is self-perceived and a person can belong to more than one group.

                The Stats New Zealand standard can be found here.

                ShortNZ Ethnicity
                Control0..6
                This element is affected by the following invariants: ele-1
                TypeExtension(NZ Ethnicity) (Extension Type: CodeableConcept)
                Is Modifierfalse
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                18. Patient.extension:maori-descent
                Slice Namemaori-descent
                Definition

                Code indicating whether the person is of Māori descent

                ShortExtension
                Control0..1
                This element is affected by the following invariants: ele-1
                TypeExtension(MaoriDescent) (Extension Type: CodeableConcept)
                Is Modifierfalse
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                20. Patient.extension:iwi
                Slice Nameiwi
                Definition

                Persons Iwi affiliation

                ShortExtension
                Control0..*
                This element is affected by the following invariants: ele-1
                TypeExtension(Nz_iwi) (Extension Type: CodeableConcept)
                Is Modifierfalse
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                22. Patient.extension:birth-country
                Slice Namebirth-country
                Definition

                The registered place of birth of the patient. A sytem may use the address.text if they don't store the birthPlace address in discrete elements.

                ShortPlace of Birth for patient
                Control0..1
                TypeExtension(Patient Birth Place) (Extension Type: Address)
                Is Modifierfalse
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                24. Patient.modifierExtension
                Definition

                May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                ShortExtensions that cannot be ignored
                Comments

                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                Control0..*
                TypeExtension
                Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
                Summaryfalse
                Requirements

                Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                Alternate Namesextensions, user content
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                26. Patient.identifier
                Definition

                An identifier for this patient.

                ShortAn identifier for this patient
                NoteThis is a business identifier, not a resource identifier (see discussion)
                Control0..*
                TypeIdentifier
                Is Modifierfalse
                Must Supporttrue
                Summarytrue
                Requirements

                Patients are almost always assigned specific numerical identifiers.

                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                SlicingThis element introduces a set of slices on Patient.identifier. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                • value @ system
                • 28. Patient.identifier:NHI
                  Slice NameNHI
                  Definition

                  The NHI number is a unique number for all New Zealanders, assigned at birth

                  ShortThe currently active NHI
                  NoteThis is a business identifier, not a resource identifier (see discussion)
                  Control0..1
                  TypeIdentifier
                  Is Modifierfalse
                  Must Supporttrue
                  Summarytrue
                  Requirements

                  Patients are almost always assigned specific numerical identifiers.

                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  30. Patient.identifier:NHI.id
                  Definition

                  Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                  ShortUnique id for inter-element referencing
                  Control0..1
                  Typestring
                  Is Modifierfalse
                  XML FormatIn the XML format, this property is represented as an attribute.
                  Summaryfalse
                  32. Patient.identifier:NHI.extension
                  Definition

                  May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                  ShortAdditional content defined by implementations
                  Comments

                  There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                  Control0..*
                  TypeExtension
                  Is Modifierfalse
                  Summaryfalse
                  Alternate Namesextensions, user content
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                  SlicingThis element introduces a set of slices on Patient.identifier.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                  • value @ url
                  • 34. Patient.identifier:NHI.use
                    Definition

                    The purpose of this identifier.

                    Shortfixed to official
                    Comments

                    Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.

                    Control0..1
                    BindingThe codes SHALL be taken from IdentifierUse
                    (required to http://hl7.org/fhir/ValueSet/identifier-use|4.0.1)

                    Identifies the purpose for this identifier, if known .

                    Typecode
                    Is Modifiertrue because This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one.
                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                    Summarytrue
                    Requirements

                    Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.

                    Fixed Valueoffical
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    36. Patient.identifier:NHI.type
                    Definition

                    A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.

                    ShortDescription of identifier
                    Comments

                    This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.

                    Control0..1
                    BindingUnless not suitable, these codes SHALL be taken from Identifier Type Codes
                    (extensible to http://hl7.org/fhir/ValueSet/identifier-type)

                    A coded type for an identifier that can be used to determine which identifier to use for a specific purpose.

                    TypeCodeableConcept
                    Is Modifierfalse
                    Summarytrue
                    Requirements

                    Allows users to make use of identifiers when the identifier system is not known.

                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    38. Patient.identifier:NHI.system
                    Definition

                    Establishes the namespace for the value - that is, a URL that describes a set values that are unique.

                    ShortThe namespace for the identifier value
                    Comments

                    Identifier.system is always case sensitive.

                    Control1..1
                    Typeuri
                    Is Modifierfalse
                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                    Summarytrue
                    Requirements

                    There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.

                    Fixed Valuehttps://standards.digital.health.nz/ns/nhi-id
                    Example<br/><b>General</b>:http://www.acme.com/identifiers/patient
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    40. Patient.identifier:NHI.value
                    Definition

                    The portion of the identifier typically relevant to the user and which is unique within the context of the system.

                    ShortThe value that is unique
                    Comments

                    If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe.

                    Control0..1
                    Typestring
                    Is Modifierfalse
                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                    Summarytrue
                    Example<br/><b>General</b>:123456
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    42. Patient.identifier:NHI.period
                    Definition

                    Time period during which identifier is/was valid for use.

                    ShortTime period when id is/was valid for use
                    Control0..1
                    TypePeriod
                    Is Modifierfalse
                    Summarytrue
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    44. Patient.identifier:NHI.assigner
                    Definition

                    Organization that issued/manages the identifier.

                    ShortOrganization that issued id (may be just text)
                    Comments

                    The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization.

                    Control0..1
                    TypeReference(Organization)
                    Is Modifierfalse
                    Summarytrue
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    46. Patient.identifier:dormant
                    Slice Namedormant
                    Definition

                    An NHI of the person that is no longer in use. An NHI becomes dormant when it is discovered that 2 NHIs exist for the same person. The NHIs are linked, one becomes ‘live’ the other ‘dormant’.

                    ShortNHI identifiers that have been deprecated for this Person
                    NoteThis is a business identifier, not a resource identifier (see discussion)
                    Control0..*
                    TypeIdentifier
                    Is Modifierfalse
                    Must Supporttrue
                    Summarytrue
                    Requirements

                    Patients are almost always assigned specific numerical identifiers.

                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    48. Patient.identifier:dormant.id
                    Definition

                    Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                    ShortUnique id for inter-element referencing
                    Control0..1
                    Typestring
                    Is Modifierfalse
                    XML FormatIn the XML format, this property is represented as an attribute.
                    Summaryfalse
                    50. Patient.identifier:dormant.extension
                    Definition

                    May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                    ShortAdditional content defined by implementations
                    Comments

                    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                    Control0..*
                    TypeExtension
                    Is Modifierfalse
                    Summaryfalse
                    Alternate Namesextensions, user content
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                    SlicingThis element introduces a set of slices on Patient.identifier.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                    • value @ url
                    • 52. Patient.identifier:dormant.use
                      Definition

                      The purpose of this identifier.

                      Shortfixed to old
                      Comments

                      Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.

                      Control0..1
                      BindingThe codes SHALL be taken from IdentifierUse
                      (required to http://hl7.org/fhir/ValueSet/identifier-use|4.0.1)

                      Identifies the purpose for this identifier, if known .

                      Typecode
                      Is Modifiertrue because This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one.
                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                      Summarytrue
                      Requirements

                      Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.

                      Fixed Valueold
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      54. Patient.identifier:dormant.type
                      Definition

                      A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.

                      ShortDescription of identifier
                      Comments

                      This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.

                      Control0..1
                      BindingUnless not suitable, these codes SHALL be taken from Identifier Type Codes
                      (extensible to http://hl7.org/fhir/ValueSet/identifier-type)

                      A coded type for an identifier that can be used to determine which identifier to use for a specific purpose.

                      TypeCodeableConcept
                      Is Modifierfalse
                      Summarytrue
                      Requirements

                      Allows users to make use of identifiers when the identifier system is not known.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      56. Patient.identifier:dormant.system
                      Definition

                      Establishes the namespace for the value - that is, a URL that describes a set values that are unique.

                      ShortThe namespace for the identifier value
                      Comments

                      Identifier.system is always case sensitive.

                      Control1..1
                      Typeuri
                      Is Modifierfalse
                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                      Summarytrue
                      Requirements

                      There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.

                      Fixed Valuehttps://standards.digital.health.nz/ns/nhi-id
                      Example<br/><b>General</b>:http://www.acme.com/identifiers/patient
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      58. Patient.identifier:dormant.value
                      Definition

                      The portion of the identifier typically relevant to the user and which is unique within the context of the system.

                      ShortThe value that is unique
                      Comments

                      If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe.

                      Control0..1
                      Typestring
                      Is Modifierfalse
                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                      Summarytrue
                      Example<br/><b>General</b>:123456
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      60. Patient.identifier:dormant.period
                      Definition

                      Time period during which identifier is/was valid for use.

                      ShortTime period when id is/was valid for use
                      Control0..1
                      TypePeriod
                      Is Modifierfalse
                      Summarytrue
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      62. Patient.identifier:dormant.assigner
                      Definition

                      Organization that issued/manages the identifier.

                      ShortOrganization that issued id (may be just text)
                      Comments

                      The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization.

                      Control0..1
                      TypeReference(Organization)
                      Is Modifierfalse
                      Summarytrue
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      64. Patient.active
                      Definition

                      Whether this patient record is in active use. Many systems use this property to mark as non-current patients, such as those that have not been seen for a period of time based on an organization's business rules.

                      It is often used to filter patient lists to exclude inactive patients

                      Deceased patients may also be marked as inactive for the same reasons, but may be active for some time after death.

                      ShortWhether this patient's record is in active use
                      Comments

                      If a record is inactive, and linked to an active record, then future patient/record updates should occur on the other patient.

                      Control0..1
                      Typeboolean
                      Is Modifiertrue because This element is labelled as a modifier because it is a status element that can indicate that a record should not be treated as valid
                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                      Summarytrue
                      Requirements

                      Need to be able to mark a patient record as not to be used because it was created in error.

                      Meaning if MissingThis resource is generally assumed to be active if no value is provided for the active element
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      66. Patient.name
                      Definition

                      A name associated with the individual.

                      ShortA name associated with the patient
                      Comments

                      A patient may have multiple names with different uses or applicable periods. For animals, the name is a "HumanName" in the sense that is assigned and used by humans and has the same patterns.

                      Control1..*
                      TypeHumanName
                      Is Modifierfalse
                      Must Supporttrue
                      Summarytrue
                      Requirements

                      Need to be able to track the patient by multiple names. Examples are your official name and a partner name. The Alphabetic representation of the name SHALL be always provided

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      ips-pat-1: Patient.name.given, Patient.name.family or Patient.name.text SHALL be present (family.exists() or given.exists() or text.exists())
                      68. Patient.name.id
                      Definition

                      Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                      ShortUnique id for inter-element referencing
                      Control0..1
                      Typestring
                      Is Modifierfalse
                      XML FormatIn the XML format, this property is represented as an attribute.
                      Summaryfalse
                      70. Patient.name.extension
                      Definition

                      May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                      ShortAdditional content defined by implementations
                      Comments

                      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                      Control0..*
                      TypeExtension
                      Is Modifierfalse
                      Summaryfalse
                      Alternate Namesextensions, user content
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                      SlicingThis element introduces a set of slices on Patient.name.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                      • value @ url
                      • 72. Patient.name.use
                        Definition

                        Identifies the purpose for this name.

                        Shortusual | official | temp | nickname | anonymous | old | maiden
                        Comments

                        Applications can assume that a name is current unless it explicitly says that it is temporary or old.

                        Control0..1
                        BindingThe codes SHALL be taken from NameUse
                        (required to http://hl7.org/fhir/ValueSet/name-use|4.0.1)

                        The use of a human name.

                        Typecode
                        Is Modifiertrue because This is labeled as "Is Modifier" because applications should not mistake a temporary or old name etc.for a current/permanent one
                        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                        Summarytrue
                        Requirements

                        Allows the appropriate name for a particular context of use to be selected from among a set of names.

                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        74. Patient.name.text
                        Definition

                        Text representation of the full name. Due to the cultural variance around the world a consuming system may not know how to present the name correctly; moreover not all the parts of the name go in given or family. Creators are therefore strongly encouraged to provide through this element a presented version of the name. Future versions of this guide may require this element

                        ShortText representation of the full name
                        Comments

                        Can provide both a text representation and parts. Applications updating a name SHALL ensure that when both text and parts are present, no content is included in the text that isn't found in a part.

                        Control0..1
                        Typestring
                        Is Modifierfalse
                        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                        Must Supporttrue
                        Summarytrue
                        Requirements

                        A renderable, unencoded form.

                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        76. Patient.name.family
                        Definition

                        The part of a name that links to the genealogy. In some cultures (e.g. Eritrea) the family name of a son is the first name of his father.

                        ShortFamily name (often called 'Surname')
                        Comments

                        Family Name may be decomposed into specific parts using extensions (de, nl, es related cultures).

                        Control0..1
                        Typestring
                        Is Modifierfalse
                        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                        Must Supporttrue
                        Summarytrue
                        Alternate Namessurname
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        78. Patient.name.given
                        Definition

                        Given name.

                        ShortGiven names (not always 'first'). Includes middle names
                        Comments

                        If only initials are recorded, they may be used in place of the full name parts. Initials may be separated into multiple given names but often aren't due to paractical limitations. This element is not called "first name" since given names do not always come first.

                        Control0..*
                        Typestring
                        Is Modifierfalse
                        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                        Must Supporttrue
                        Summarytrue
                        Alternate Namesfirst name, middle name
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        80. Patient.name.prefix
                        Definition

                        Part of the name that is acquired as a title due to academic, legal, employment or nobility status, etc. and that appears at the start of the name.

                        ShortParts that come before the name
                        Control0..*
                        Typestring
                        Is Modifierfalse
                        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                        Summarytrue
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        82. Patient.name.suffix
                        Definition

                        Part of the name that is acquired as a title due to academic, legal, employment or nobility status, etc. and that appears at the end of the name.

                        ShortParts that come after the name
                        Control0..*
                        Typestring
                        Is Modifierfalse
                        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                        Summarytrue
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        84. Patient.name.period
                        Definition

                        Indicates the period of time when this name was valid for the named person.

                        ShortTime period when name was/is in use
                        Control0..1
                        TypePeriod
                        Is Modifierfalse
                        Summarytrue
                        Requirements

                        Allows names to be placed in historical context.

                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        86. Patient.telecom
                        Definition

                        Details for all kinds of technology mediated contact points for a person or organization, including telephone, email, etc.

                        ShortDetails of a Technology mediated contact point (phone, fax, email, etc.)
                        Comments

                        A Patient may have multiple ways to be contacted with different uses or applicable periods. May need to have options for contacting the person urgently and also to help with identification. The address might not go directly to the individual, but may reach another party that is able to proxy for the patient (i.e. home phone, or pet owner's phone).

                        Control0..*
                        This element is affected by the following invariants: ele-1
                        TypeContactPoint(Common NZ ContactPoint datatype)
                        Is Modifierfalse
                        Must Supporttrue
                        Requirements

                        People have (primary) ways to contact them in some way such as phone, email.

                        Invariantscpt-2: A system is required if a value is provided. (value.empty() or system.exists())
                        ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        88. Patient.gender
                        Definition

                        Administrative Gender - the gender that the patient is considered to have for administration and record keeping purposes.

                        Shortmale | female | other | unknown
                        Comments

                        The gender might not match the biological sex as determined by genetics or the individual's preferred identification. Note that for both humans and particularly animals, there are other legitimate possibilities than male and female, though the vast majority of systems and contexts only support male and female. Systems providing decision support or enforcing business rules should ideally do this on the basis of Observations dealing with the specific sex or gender aspect of interest (anatomical, chromosomal, social, etc.) However, because these observations are infrequently recorded, defaulting to the administrative gender is common practice. Where such defaulting occurs, rule enforcement should allow for the variation between administrative and biological, chromosomal and other gender aspects. For example, an alert about a hysterectomy on a male should be handled as a warning or overridable error, not a "hard" error. See the Patient Gender and Sex section for additional information about communicating patient gender and sex.

                        Control0..1
                        BindingThe codes SHALL be taken from AdministrativeGender
                        (required to http://hl7.org/fhir/ValueSet/administrative-gender|4.0.1)

                        The gender of a person used for administrative purposes.

                        Typecode
                        Is Modifierfalse
                        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                        Must Supporttrue
                        Summarytrue
                        Requirements

                        Needed for identification of the individual, in combination with (at least) name and birth date.

                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        90. Patient.gender.id
                        Definition

                        unique id for the element within a resource (for internal references)

                        Shortxml:id (or equivalent in JSON)
                        Control0..1
                        Typestring
                        Is Modifierfalse
                        XML FormatIn the XML format, this property is represented as an attribute.
                        Summaryfalse
                        92. Patient.gender.extension
                        Definition

                        An Extension

                        ShortExtension
                        Control0..*
                        TypeExtension
                        Is Modifierfalse
                        Summaryfalse
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                        SlicingThis element introduces a set of slices on Patient.gender.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                        • value @ url
                        • 94. Patient.gender.extension:originalText
                          Slice NameoriginalText
                          Definition

                          Text provided by the person with the choice of 'Another gender' (The FHIR AdministrativeGender CodeSystem codes this as 'other').

                          ShortExtension
                          Control0..1
                          This element is affected by the following invariants: ele-1
                          TypeExtension(GenderOriginalText) (Extension Type: string)
                          Is Modifierfalse
                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                          96. Patient.gender.value
                          Definition

                          Primitive value for code

                          ShortPrimitive value for code
                          Control0..1
                          Typestring
                          Is Modifierfalse
                          XML FormatIn the XML format, this property is represented as an attribute.
                          Summaryfalse
                          98. Patient.birthDate
                          Definition

                          The date of birth for the individual.

                          ShortThe date of birth for the individual
                          Comments

                          At least an estimated year should be provided as a guess if the real DOB is unknown There is a standard extension "patient-birthTime" available that should be used where Time is required (such as in maternity/infant care systems).

                          Control1..1
                          Typedate
                          Is Modifierfalse
                          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                          Must Supporttrue
                          Summarytrue
                          Requirements

                          Age of the individual drives many clinical processes.

                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          LOINC Code21112-8
                          100. Patient.deceased[x]
                          Definition

                          Indicates if the individual is deceased or not.

                          ShortIndicates if the individual is deceased or not
                          Comments

                          If there's no value in the instance, it means there is no statement on whether or not the individual is deceased. Most systems will interpret the absence of a value as a sign of the person being alive.

                          Control0..1
                          TypeChoice of: boolean, dateTime
                          [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                          Is Modifiertrue because This element is labeled as a modifier because once a patient is marked as deceased, the actions that are appropriate to perform on the patient may be significantly different.
                          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                          Summarytrue
                          Requirements

                          The fact that a patient is deceased influences the clinical process. Also, in human communication and relation management it is necessary to know whether the person is alive.

                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          102. Patient.address
                          Definition

                          An address expressed using postal conventions (as opposed to GPS or other location definition formats). This data type may be used to convey addresses for use in delivering mail as well as for visiting locations which might not be valid for mail delivery. There are a variety of postal address formats defined around the world.

                          ShortAn address expressed using postal conventions (as opposed to GPS or other location definition formats)
                          Comments

                          Note: address is intended to describe postal addresses for administrative purposes, not to describe absolute geographical coordinates. Postal addresses are often used as proxies for physical locations (also see the Location resource).

                          Control0..*
                          This element is affected by the following invariants: ele-1
                          TypeAddress(Common NZ Address datatype)
                          Is Modifierfalse
                          Must Supporttrue
                          Requirements

                          May need to keep track of patient addresses for contacting, billing or reporting requirements and also to help with identification.

                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          pat-cnt-2or3-char: The content of the country element (if present) SHALL be selected EITHER from ValueSet ISO Country Alpha-2 http://hl7.org/fhir/ValueSet/iso3166-1-2 OR MAY be selected from ISO Country Alpha-3 Value Set http://hl7.org/fhir/ValueSet/iso3166-1-3, IF the country is not specified in value Set ISO Country Alpha-2 http://hl7.org/fhir/ValueSet/iso3166-1-2. (country.empty() or (country.memberOf('http://hl7.org/fhir/ValueSet/iso3166-1-2') or country.memberOf('http://hl7.org/fhir/ValueSet/iso3166-1-3')))
                          104. Patient.maritalStatus
                          Definition

                          This field contains a patient's most recent marital (civil) status.

                          ShortMarital (civil) status of a patient
                          Control0..1
                          BindingUnless not suitable, these codes SHALL be taken from Marital Status Codes
                          (extensible to http://hl7.org/fhir/ValueSet/marital-status)

                          The domestic partnership status of a person.

                          TypeCodeableConcept
                          Is Modifierfalse
                          Summaryfalse
                          Requirements

                          Most, if not all systems capture it.

                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          106. Patient.multipleBirth[x]
                          Definition

                          Indicates whether the patient is part of a multiple (boolean) or indicates the actual birth order (integer).

                          ShortWhether patient is part of a multiple birth
                          Comments

                          Where the valueInteger is provided, the number is the birth number in the sequence. E.g. The middle birth in triplets would be valueInteger=2 and the third born would have valueInteger=3 If a boolean value was provided for this triplets example, then all 3 patient records would have valueBoolean=true (the ordering is not indicated).

                          Control0..1
                          TypeChoice of: boolean, integer
                          [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                          Is Modifierfalse
                          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                          Summaryfalse
                          Requirements

                          For disambiguation of multiple-birth children, especially relevant where the care provider doesn't meet the patient, such as labs.

                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          108. Patient.photo
                          Definition

                          Image of the patient.

                          ShortImage of the patient
                          Comments

                          Guidelines:

                          • Use id photos, not clinical photos.
                          • Limit dimensions to thumbnail.
                          • Keep byte count low to ease resource updates.
                          Control0..*
                          TypeAttachment
                          Is Modifierfalse
                          Summaryfalse
                          Requirements

                          Many EHR systems have the capability to capture an image of the patient. Fits with newer social media usage too.

                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          110. Patient.contact
                          Definition

                          A contact party (e.g. guardian, partner, friend) for the patient.

                          ShortA contact party (e.g. guardian, partner, friend) for the patient
                          Comments

                          Contact covers all kinds of contact parties: family members, business contacts, guardians, caregivers. Not applicable to register pedigree and family ties beyond use of having contact.

                          Control0..*
                          TypeBackboneElement
                          Is Modifierfalse
                          Summaryfalse
                          Requirements

                          Need to track people you can contact about the patient.

                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          pat-1: SHALL at least contain a contact's details or a reference to an organization (name.exists() or telecom.exists() or address.exists() or organization.exists())
                          112. Patient.contact.id
                          Definition

                          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                          ShortUnique id for inter-element referencing
                          Control0..1
                          Typestring
                          Is Modifierfalse
                          XML FormatIn the XML format, this property is represented as an attribute.
                          Summaryfalse
                          114. Patient.contact.extension
                          Definition

                          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                          ShortAdditional content defined by implementations
                          Comments

                          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                          Control0..*
                          TypeExtension
                          Is Modifierfalse
                          Summaryfalse
                          Alternate Namesextensions, user content
                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                          116. Patient.contact.modifierExtension
                          Definition

                          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                          ShortExtensions that cannot be ignored even if unrecognized
                          Comments

                          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                          Control0..*
                          TypeExtension
                          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                          Summarytrue
                          Requirements

                          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                          Alternate Namesextensions, user content, modifiers
                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                          118. Patient.contact.relationship
                          Definition

                          A concept that may be defined by a formal reference to a terminology or ontology or may be provided by text.

                          ShortConcept - reference to a terminology or just text
                          Comments

                          Not all terminology uses fit this general pattern. In some cases, models should not use CodeableConcept and use Coding directly and provide their own structure for managing text, codings, translations and the relationship between elements and pre- and post-coordination.

                          Control0..*
                          This element is affected by the following invariants: ele-1
                          BindingUnless not suitable, these codes SHALL be taken from PatientContactRelationship
                          (extensible to http://hl7.org/fhir/ValueSet/patient-contactrelationship)

                          The nature of the relationship between a patient and a contact person for that patient.

                          TypeCodeableConcept(Codeable Concept (IPS))
                          Is Modifierfalse
                          Requirements

                          Used to determine which contact person is the most relevant to approach, depending on circumstances.

                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          120. Patient.contact.name
                          Definition

                          A name associated with the contact person.

                          ShortA name associated with the contact person
                          Control0..1
                          TypeHumanName
                          Is Modifierfalse
                          Summaryfalse
                          Requirements

                          Contact persons need to be identified by name, but it is uncommon to need details about multiple other names for that contact person.

                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          122. Patient.contact.telecom
                          Definition

                          A contact detail for the person, e.g. a telephone number or an email address.

                          ShortA contact detail for the person
                          Comments

                          Contact may have multiple ways to be contacted with different uses or applicable periods. May need to have options for contacting the person urgently, and also to help with identification.

                          Control0..*
                          TypeContactPoint
                          Is Modifierfalse
                          Summaryfalse
                          Requirements

                          People have (primary) ways to contact them in some way such as phone, email.

                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          124. Patient.contact.address
                          Definition

                          Address for the contact person.

                          ShortAddress for the contact person
                          Control0..1
                          TypeAddress
                          Is Modifierfalse
                          Summaryfalse
                          Requirements

                          Need to keep track where the contact person can be contacted per postal mail or visited.

                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          126. Patient.contact.gender
                          Definition

                          Administrative Gender - the gender that the contact person is considered to have for administration and record keeping purposes.

                          Shortmale | female | other | unknown
                          Control0..1
                          BindingThe codes SHALL be taken from AdministrativeGender
                          (required to http://hl7.org/fhir/ValueSet/administrative-gender|4.0.1)

                          The gender of a person used for administrative purposes.

                          Typecode
                          Is Modifierfalse
                          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                          Summaryfalse
                          Requirements

                          Needed to address the person correctly.

                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          128. Patient.contact.organization
                          Definition

                          Organization on behalf of which the contact is acting or for which the contact is working.

                          ShortOrganization that is associated with the contact
                          Control0..1
                          This element is affected by the following invariants: pat-1
                          TypeReference(Organization)
                          Is Modifierfalse
                          Summaryfalse
                          Requirements

                          For guardians or business related contacts, the organization is relevant.

                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          130. Patient.contact.period
                          Definition

                          The period during which this contact person or organization is valid to be contacted relating to this patient.

                          ShortThe period during which this contact person or organization is valid to be contacted relating to this patient
                          Control0..1
                          TypePeriod
                          Is Modifierfalse
                          Summaryfalse
                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          132. Patient.communication
                          Definition

                          A language which may be used to communicate with the patient about his or her health.

                          ShortA language which may be used to communicate with the patient about his or her health
                          Comments

                          If no language is specified, this implies that the default local language is spoken. If you need to convey proficiency for multiple modes, then you need multiple Patient.Communication associations. For animals, language is not a relevant field, and should be absent from the instance. If the Patient does not speak the default local language, then the Interpreter Required Standard can be used to explicitly declare that an interpreter is required.

                          Control0..*
                          TypeBackboneElement
                          Is Modifierfalse
                          Summaryfalse
                          Requirements

                          If a patient does not speak the local language, interpreters may be required, so languages spoken and proficiency are important things to keep track of both for patient and other persons of interest.

                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          134. Patient.communication.id
                          Definition

                          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                          ShortUnique id for inter-element referencing
                          Control0..1
                          Typestring
                          Is Modifierfalse
                          XML FormatIn the XML format, this property is represented as an attribute.
                          Summaryfalse
                          136. Patient.communication.extension
                          Definition

                          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                          ShortAdditional content defined by implementations
                          Comments

                          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                          Control0..*
                          TypeExtension
                          Is Modifierfalse
                          Summaryfalse
                          Alternate Namesextensions, user content
                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                          138. Patient.communication.modifierExtension
                          Definition

                          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                          ShortExtensions that cannot be ignored even if unrecognized
                          Comments

                          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                          Control0..*
                          TypeExtension
                          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                          Summarytrue
                          Requirements

                          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                          Alternate Namesextensions, user content, modifiers
                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                          140. Patient.communication.language
                          Definition

                          The ISO-639-1 alpha 2 code in lower case for the language, optionally followed by a hyphen and the ISO-3166-1 alpha 2 code for the region in upper case; e.g. "en" for English, or "en-US" for American English versus "en-EN" for England English.

                          ShortThe language which can be used to communicate with the patient about his or her health
                          Comments

                          The structure aa-BB with this exact casing is one the most widely used notations for locale. However not all systems actually code this but instead have it as free text. Hence CodeableConcept instead of code as the data type.

                          Control1..1
                          BindingThe codes SHOULD be taken from CommonLanguages
                          (preferred to http://hl7.org/fhir/ValueSet/languages)

                          A human language.

                          Additional BindingsPurpose
                          AllLanguagesMax Binding
                          TypeCodeableConcept
                          Is Modifierfalse
                          Summaryfalse
                          Requirements

                          Most systems in multilingual countries will want to convey language. Not all systems actually need the regional dialect.

                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          142. Patient.communication.preferred
                          Definition

                          Indicates whether or not the patient prefers this language (over other languages he masters up a certain level).

                          ShortLanguage preference indicator
                          Comments

                          This language is specifically identified for communicating healthcare information.

                          Control0..1
                          Typeboolean
                          Is Modifierfalse
                          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                          Summaryfalse
                          Requirements

                          People that master multiple languages up to certain level may prefer one or more, i.e. feel more confident in communicating in a particular language making other languages sort of a fall back method.

                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          144. Patient.generalPractitioner
                          Definition

                          Patient's nominated care provider.

                          ShortPatient's nominated primary care provider
                          Comments

                          This may be the primary care provider (in a GP context), or it may be a patient nominated care manager in a community/disability setting, or even organization that will provide people to perform the care provider roles. It is not to be used to record Care Teams, these should be in a CareTeam resource that may be linked to the CarePlan or EpisodeOfCare resources. Multiple GPs may be recorded against the patient for various reasons, such as a student that has his home GP listed along with the GP at university during the school semesters, or a "fly-in/fly-out" worker that has the onsite GP also included with his home GP to remain aware of medical issues.

                          Jurisdictions may decide that they can profile this down to 1 if desired, or 1 per type.

                          Control0..*
                          TypeReference(Organization, Practitioner, PractitionerRole)
                          Is Modifierfalse
                          Must Supporttrue
                          Must Support TypesNo must-support rules about the choice of types/profiles
                          Summaryfalse
                          Alternate NamescareProvider
                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          146. Patient.managingOrganization
                          Definition

                          Organization that is the custodian of the patient record.

                          ShortOrganization that is the custodian of the patient record
                          Comments

                          There is only one managing organization for a specific patient record. Other organizations will have their own Patient record, and may use the Link property to join the records together (or a Person resource which can include confidence ratings for the association).

                          Control0..1
                          TypeReference(Organization)
                          Is Modifierfalse
                          Summarytrue
                          Requirements

                          Need to know who recognizes this patient record, manages and updates it.

                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          148. Patient.link
                          Definition

                          Link to another patient resource that concerns the same actual patient.

                          ShortLink to another patient resource that concerns the same actual person
                          Comments

                          There is no assumption that linked patient records have mutual links.

                          Control0..*
                          TypeBackboneElement
                          Is Modifiertrue because This element is labeled as a modifier because it might not be the main Patient resource, and the referenced patient should be used instead of this Patient record. This is when the link.type value is 'replaced-by'
                          Summarytrue
                          Requirements

                          There are multiple use cases:

                          • Duplicate patient records due to the clerical errors associated with the difficulties of identifying humans consistently, and
                          • Distribution of patient information across multiple servers.
                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          150. Patient.link.id
                          Definition

                          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                          ShortUnique id for inter-element referencing
                          Control0..1
                          Typestring
                          Is Modifierfalse
                          XML FormatIn the XML format, this property is represented as an attribute.
                          Summaryfalse
                          152. Patient.link.extension
                          Definition

                          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                          ShortAdditional content defined by implementations
                          Comments

                          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                          Control0..*
                          TypeExtension
                          Is Modifierfalse
                          Summaryfalse
                          Alternate Namesextensions, user content
                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                          154. Patient.link.modifierExtension
                          Definition

                          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                          ShortExtensions that cannot be ignored even if unrecognized
                          Comments

                          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                          Control0..*
                          TypeExtension
                          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                          Summarytrue
                          Requirements

                          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                          Alternate Namesextensions, user content, modifiers
                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                          156. Patient.link.other
                          Definition

                          The other patient resource that the link refers to.

                          ShortThe other patient or related person resource that the link refers to
                          Comments

                          Referencing a RelatedPerson here removes the need to use a Person record to associate a Patient and RelatedPerson as the same individual.

                          Control1..1
                          TypeReference(Patient, RelatedPerson)
                          Is Modifierfalse
                          Summarytrue
                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          158. Patient.link.type
                          Definition

                          The type of link between this patient resource and another patient resource.

                          Shortreplaced-by | replaces | refer | seealso
                          Control1..1
                          BindingThe codes SHALL be taken from LinkType
                          (required to http://hl7.org/fhir/ValueSet/link-type|4.0.1)

                          The type of link between this patient resource and another patient resource.

                          Typecode
                          Is Modifierfalse
                          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                          Summarytrue
                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))